tomo2k9
Member
Registered: 17th Sep 09
Location: Birmingham/ wednesbury
User status: Offline
|
hey all most of you will no im doing the back quarter of my car now only the orther day i noticed that it has to have a swadge line (think thats whats it called) on the botom its goes all the way along the door and then onto the back quarter but i forgot to put this in, so i had ago of it the orther day think i done a pritty good job but wouldent mind abit of advice on how to get it perfect, i sanded a ditch kind of thing at the levle it should be and then skimed it with filler, i think its alrite so need abit of help (tom) lol need your help mate
[Edited on 17-04-2010 by tomo2k9]
[Edited on 14-05-2010 by tomo2k9]
|
tomo2k9
Member
Registered: 17th Sep 09
Location: Birmingham/ wednesbury
User status: Offline
|
ill get some pics up later lads
|
Tomnova16
Premium Member
Registered: 21st Jan 06
Location: Gerrards Cross Drives: Porsche 911
User status: Offline
|
hard to tell how it looks without pics but best thing to do is get a shaped piece of plastic the same shape as the grove on the other side of the car. Put some p80 round it and rub it along to create the grove, put a line on first with tape or pen to make sure its straight.
http://www.lemass.co.uk/ for all your automotive/bodyshop needs
Located in Chalfont st Peter
|
tomo2k9
Member
Registered: 17th Sep 09
Location: Birmingham/ wednesbury
User status: Offline
|
ill get you some pics up mate i mite of fucked it up mate but you can see for yourself like took me ages to get the line put in but its in, but nothing what a bit of filler can put write, but ill get some pics for ya mate
|
tomo2k9
Member
Registered: 17th Sep 09
Location: Birmingham/ wednesbury
User status: Offline
|
here you go tom , i mite of fucked it up but its there i can fill it to get the shape, just need some pointers now iv got the line like
[Edited on 18-04-2010 by tomo2k9]
|
x14xe sport
Member
Registered: 27th Apr 09
User status: Offline
|
think you just need to sand it down and build up with filler to you have the correct shape, look at the other side as your doing it and see how you go
|
tomo2k9
Member
Registered: 17th Sep 09
Location: Birmingham/ wednesbury
User status: Offline
|
i felt the orther side and its only slite isent it, its not a maive ditch rely compared to the door its like it fades out so i havent got that deep i gve it a skim of filler to get the curve on it, but it is hard to get smack on i think its just trial and error really
|
x14xe sport
Member
Registered: 27th Apr 09
User status: Offline
|
yea just keeping going, easy enough mixing up a bit more filler just frustrating starting again
|
tomo2k9
Member
Registered: 17th Sep 09
Location: Birmingham/ wednesbury
User status: Offline
|
ino yh but i just want to get it smack on
|
tomo2k9
Member
Registered: 17th Sep 09
Location: Birmingham/ wednesbury
User status: Offline
|
bump
|
tomo2k9
Member
Registered: 17th Sep 09
Location: Birmingham/ wednesbury
User status: Offline
|
bump anyone, need to no what i should do with it no to make sure its rite
|
tomo2k9
Member
Registered: 17th Sep 09
Location: Birmingham/ wednesbury
User status: Offline
|
bump any sugestions ? iv got it near anough but could do with abit more rubbing down
|
Tomnova16
Premium Member
Registered: 21st Jan 06
Location: Gerrards Cross Drives: Porsche 911
User status: Offline
|
i see what you mean now, a curved block is what you need
http://www.lemass.co.uk/ for all your automotive/bodyshop needs
Located in Chalfont st Peter
|
Tomnova16
Premium Member
Registered: 21st Jan 06
Location: Gerrards Cross Drives: Porsche 911
User status: Offline
|
http://www.lemass.co.uk/ for all your automotive/bodyshop needs
Located in Chalfont st Peter
|
tomo2k9
Member
Registered: 17th Sep 09
Location: Birmingham/ wednesbury
User status: Offline
|
were would i get one of those from lol iv just got a standard flat block mate i used some rely ruff paper to take abit out of it, then i skimed it with filler to get the kinda shape i needed then gave it anorther rub down, its not a masive indent on the back so im tying not to over do it, because on the botom of the door that swadge is pritty big but it kinda disapears towards the back am i right ?
|
corsabsonny
Member
Registered: 5th Jan 10
Location: chatham, kent
User status: Offline
|
can do it with a piece of plastic tubing
|
tomo2k9
Member
Registered: 17th Sep 09
Location: Birmingham/ wednesbury
User status: Offline
|
ooo summut like piece of guttering ?
|
corsabsonny
Member
Registered: 5th Jan 10
Location: chatham, kent
User status: Offline
|
yes mate, either the half round actualy gutter, or just use a down pipe and rap your paper round it, never go any finer than 80, prime it with high build block it down with 320 re prime it then 800 wet flat it
|
Tomnova16
Premium Member
Registered: 21st Jan 06
Location: Gerrards Cross Drives: Porsche 911
User status: Offline
|
what he said
http://www.lemass.co.uk/ for all your automotive/bodyshop needs
Located in Chalfont st Peter
|
tomo2k9
Member
Registered: 17th Sep 09
Location: Birmingham/ wednesbury
User status: Offline
|
ok mate cheers have ago of i later its just taking the piss to do i dont want to spray it unil its perfect
|
corsabsonny
Member
Registered: 5th Jan 10
Location: chatham, kent
User status: Offline
|
you should only need one or two skims tbh mate the more filler you put in the worse itll get, not sure youll understand the way i write this but stick a piece of tape along the line your trying to get, block down up to that line but sort of go past it, then do it the other side of the line, hard to explain but if you have the right amount of filler on there you should be able to get that shape in there pretty easy
|
tomo2k9
Member
Registered: 17th Sep 09
Location: Birmingham/ wednesbury
User status: Offline
|
yh i think iv got it back pritty sweet mate just a little bit more rubbing down not much just a touch more and it will be good because its not that deep on the back so i dont need to go mad on it , i had anorther go of it last night and it is getting there just need to get it smack on before painting it, do you lot still use stopper? to get rid of miner inperfections? cus iv got some but its a pain in the arse to use lol
|
corsabsonny
Member
Registered: 5th Jan 10
Location: chatham, kent
User status: Offline
|
ys it a pain?if you have any deep pin holes then yes use it, basically think to your self will the primer fill that imperfection up..no? then stopper it..whats hard about using it? if u find it hard to spread thinly get soem dolphin glaze, its liek a slightly thicker but runnier high build primer in a sachet, mix it with hardener and you can skim it lovely over all the small holes, ideal for skimming hole panels aswell because it flows out, you ever watched american hotrod? they use the same stuff to fill all the panels
|
tomo2k9
Member
Registered: 17th Sep 09
Location: Birmingham/ wednesbury
User status: Offline
|
yh i just think its to thick mate when i spread it, it goes on sweet but then when i go to do it again its alredy gone off abit nd it fucks it all up, nd thats the stuff they use at my college is it any good? is it easy to use ? and it does leave a good finish dont it a teacher is doing a old mini and he is using that stuff on it and i was wondering what it was, its got blue writing with a picture of a dolphin on aint it in like a packet kind of thing
|
corsabsonny
Member
Registered: 5th Jan 10
Location: chatham, kent
User status: Offline
|
yh looks like one of them capri sun cartons, with a little screw on lid..yh mate its shit hot, exspensive..but much better than normal stopper, what colours your stopper after youve mixed it up?? you need to keep your spreader as close to the panel as possible otherwise when you try and rub the stopper down the area aroudn it will be a low with the stopper beign a high
|