corsa5dr
Member
Registered: 12th Jan 03
Location: Bath/Bristol - Evo 4 GSR
User status: Offline
|
There is one bolt that sticks out from the front archs on my car, will that catch on the tyre when i fit my 17's or is clearance from that front bolt not a problem?
It seems slightly longer than the rear arch bolts that ive taken out, maybe its worth cutting off or just removing totally.
cheers
|
dig dave2811
Member
Registered: 6th Jan 03
Location: newport sout wales WCM
User status: Offline
|
YEAH DO U HAVE TO MODIFY THE FROUNT ARCHES ON A 5 DOOR TO GET 17'S ON, I KNOW U HAVE TO DO THE REAR ONES JUST WOUNDERING BOUT THE FROUNT ONES
|
M4rk P
Member
Registered: 22nd Jan 03
Location: Herts, Car:1.5tds
User status: Offline
|
how much is it lowered? my bros 5dr is 60mm on 17's and the arch at the front doesnt rub, but this is with the plastic arch off. i assume if you cut the bolt off it should be ok.
|
TOMAS
Member
Registered: 7th Aug 02
Location: Nottinghamshire
User status: Offline
|
Fronts on the 5door are the same as 3door. Im lowered 65mm with 17's and uprated bumpstops on my 5door without a scrub. It Just catches the weather-guards on absoloute full-lock but no need to modify.
|
luca2020
Member
Registered: 26th May 02
Location: Maidstone, Kent
User status: Offline
|
17s on standard suspension wont rub by a mile
how much u gonna/have lowered it
|
Kris TD
Member
Registered: 25th Mar 02
Location: Ware, Hertfordshire
User status: Offline
|
mark, the arch bolts are inside the arch liner anyway. tomas, do u have bump stops on the front?
mine doesnt rub on full lock atall, hehe
|
Kris TD
Member
Registered: 25th Mar 02
Location: Ware, Hertfordshire
User status: Offline
|
just noticed u have a 5 door too, as my bro said mine is lowered 60mm on 17's ( 5 door)
doesnt rub atall. had to butcher the rear archs though, there is a pic on
http://communities.msn.com/markpringle
the front has gone down there but the rear hasnt cos its sitting on the bumpstops, ive got to cut them quite a lot then it will go down at least 5cm from what it is now.
|
Kris TD
Member
Registered: 25th Mar 02
Location: Ware, Hertfordshire
User status: Offline
|
http://groups.msn.com/markpringle/carmods.msnw?action=ShowPhoto&PhotoID=53
this is wat my rear archs are like now
|
Gambit
Member
Registered: 5th Jun 00
Location: Common Sense HQ
User status: Offline
|
quote: Originally posted by Kris TD
http://groups.msn.com/markpringle/carmods.msnw?action=ShowPhoto&PhotoID=53
this is wat my rear archs are like now
a mess basically!
|
Kris TD
Member
Registered: 25th Mar 02
Location: Ware, Hertfordshire
User status: Offline
|
yep, but i have psg2 wide archs so its not gonna be visible
|
Miner
Member
Registered: 28th Aug 02
Location: Ayrshire,Drives: Corsa 12v & CBR600Sport
User status: Offline
|
I buffed mine off with a softex wheel & squeezed sillicone between the liner & the arch to stop it flapping. The bolt was gouging the shoulder of the tyre & I've only got 15's!
|
corsa5dr
Member
Registered: 12th Jan 03
Location: Bath/Bristol - Evo 4 GSR
User status: Offline
|
Im down 40mm, just that this single bolt at the front sticks out a bit. Might just cut it off to be safe.
|
Kris TD
Member
Registered: 25th Mar 02
Location: Ware, Hertfordshire
User status: Offline
|
mihgt aswell, its only a bolt.
|
corsa5dr
Member
Registered: 12th Jan 03
Location: Bath/Bristol - Evo 4 GSR
User status: Offline
|
got the wheels on now and its nowhere near on the front, doesnt rub on the back on big bumps with me plus front passenger, not too bad.
Gonna keep it like that 4 a while, might do more to rear arches later to get rear passengers in.
Thats just with debolted rear arches.
|
bradfincham
Member
Registered: 20th Sep 02
Location: East Of England Drives: Clio 172
User status: Offline
|
i took the rears out on mine, and the fronts! cut back the thread!
mines lowered 40mm on 17's, and has just rubbed away the arch liner
|
Kris TD
Member
Registered: 25th Mar 02
Location: Ware, Hertfordshire
User status: Offline
|
corsa 5 dr, is yours lowered?
|
corsa5dr
Member
Registered: 12th Jan 03
Location: Bath/Bristol - Evo 4 GSR
User status: Offline
|
yeah, down 40mm on apex springs and standard shocks
|