nathan_27
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 4th Jun 09
Location: Leighton Buzzard, Bedfordshire
User status: Offline
|
im considering just selling my engine box and loom to fund my door supervisors licence and training
its in the car and running
you can come see it running and il take it out there and then if you want it
its got
eds phase 2 ecu
xe cam on vernier
and thats about it really other then that its standard
the head was rebuilt when the cam was fitted and hasnt really been run since
iv done about 5/6 miles in it if that and my mate had it in and running for 4 miles
its got new oil in it and the filter was new aswell but i dented it abit when i put the engine in my nova
the gear box is spot on nice and tight and selects every gear with out a issue no knocks or bangs or nasty noises
its converted to 2wd and has been drilled and tapped to fit in my nova
the clutch pressure plate needs changing though as its on its last legs its got a decent clutch in it but the pressure plate isnt working properly so it slips at high revs and full boost
im just trying to be honest so i dont get any come backs
im looking for £1500 for the lot which is what i could get for it all on ebay sold as one or split
please no need for time wasters and dreamers
and no need to spam my thread
buyer collects so theres not going to be any hassle
if you dont want to collect il happily rent a van and bring it to you if you cover the £50 van rental and fuel
i do have a history on mig for not posting things off and thats it so make of it what you will and dont judge me please im a genuine bloke trying to start a fresh with a new job
regards nathan
|
nathan_27
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 4th Jun 09
Location: Leighton Buzzard, Bedfordshire
User status: Offline
|
up
|
nathan_27
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 4th Jun 09
Location: Leighton Buzzard, Bedfordshire
User status: Offline
|
up
|
Danny W
Organiser: East Midlands Premium Member
Registered: 14th Nov 05
Location: Northamptonshire
User status: Offline
|
Hi mate, interested in the F28. When you say drilled and tapped would this effect it in any way when mounting to the c20let engine or fitting to a corsa? U2U me best price as i'm not too far from you
cheers
Dan
Smoke Grey 5 Door
EastMids Regional Events
|
nathan_27
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 4th Jun 09
Location: Leighton Buzzard, Bedfordshire
User status: Offline
|
u2u'd mate
|
nathan_27
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 4th Jun 09
Location: Leighton Buzzard, Bedfordshire
User status: Offline
|
up
|