Scotty C
Member
Registered: 6th Nov 05
Location: Kidderminster Drives: 1.6 16v Sport
User status: Offline
|
The next 'mod' on the corsa is a full system as the exhaust is sitting on the rear beam
Is there any off the shelf exhausts where u can get a specific bore? I'm wanting 2.25''.
I'm wanting it quite loud too. Not chavvy loud but a noticeable loud. I hear Ashley is quite good? But does the tip come out straight?
Thanks for your help
|
chloe16v
Member
Registered: 29th Nov 07
Location: Rotherham
User status: Offline
|
have alook on exhausts uk web site, they do an online shop aswell as fit them for you, highly recomend them, i have just had my de-cat and cat back system fitted there last weekend
|
Scotty C
Member
Registered: 6th Nov 05
Location: Kidderminster Drives: 1.6 16v Sport
User status: Offline
|
I'll have a look now. Thanks
|
gez bay
Member
Registered: 14th Feb 08
Location: South Wales drives: Vxr
User status: Offline
|
get an ashley system mate. I had one and it was awsome! Quiet on tick over and sounded the nuts on full load (i had decat aswel)
my tip came out straight. Just take your time adjusting it underneath.
Type gezc16b in on youtube and my corsa should be on there popping. Not a great vid, but you get the idea of how loud it will be.
|
belton
Member
Registered: 23rd Jul 09
Location: Kent
User status: Offline
|
Get a 2' system, when I got my exhaust done at powerflow the guy was saying 2' is by far the best size for power on small block engines, powerflow are good. But bloody expensive!
|
Daveskater
Premium Member
Registered: 29th Apr 08
Location: Oxford, UK Drives: Jap wagon
User status: Offline
|
I had an Ashley backbox on my old one and the tip wasn't straight but it didn't bother me really. Sounded good too
Numberwang!
Originally posted by AlunJ
I like you Dave, you are a man of men
Originally Whatapp'd by Neo
Dave's maybe capable of a drive-by cuddle
Look at my pictures
|
billy_t15
Member
Registered: 25th Jun 09
User status: Offline
|
my ashley comes out at an agle but looks good imo
|
N3CRO
Member
Registered: 12th Apr 07
Location: Sandy, Bedfordshire
User status: Offline
|
Straight FTW
Angle FTL.
|
Mattb
Member
Registered: 2nd Feb 03
Location: Under your sisters bed
User status: Offline
|
quote: Originally posted by belton
Get a 2' system, when I got my exhaust done at powerflow the guy was saying 2' is by far the best size for power on small block engines, powerflow are good. But bloody expensive!
Powerflow expensive... The exhaust for my old corsa made by simpson race exhausts was close to £1000
[Edited on 28-08-2010 by Mattb]
|
Scotty C
Member
Registered: 6th Nov 05
Location: Kidderminster Drives: 1.6 16v Sport
User status: Offline
|
Gez - how did u get it to come out straight? Id get an Ashley if I could get the tip out straight. As I've heard off quite a few people that they come out at angle...
And what did u have? Was u running decat and middlebox?
|
chrex
Member
Registered: 26th Aug 07
Location: Brawdy/Wirral
User status: Offline
|
yea the ashleys are an angled system...very few corsa systems are stright though, unless its powerflow.
Both my scorpions, the lexmaul and the Ashley were all angled.
Scorpions were my fav tbh, the imola tip, cracking systems! The ashley was alright, but the quality isn't brilliant...and they are noisy.
Scorpion:
Ashley:
If i got another corsa...i'd be after a scorpion.
|
shaunmods
Premium Member
Registered: 12th Mar 07
Location: Glascote, Staffordshire
User status: Offline
|
Janspeed ones come out straight They are very quiet with a mid box though so you'd probably want a straight through middle if you want it nice and loud
Pic of my janspeed exhaust but on a different car as its hard to see on mine.
[Edited on 28-08-2010 by shaunmods]
|
N3CRO
Member
Registered: 12th Apr 07
Location: Sandy, Bedfordshire
User status: Offline
|
The custom one I had on my Corsa was angled but barely. To look at it, it looked straight.
|
Norcy91
Member
Registered: 15th Sep 08
User status: Offline
|
My Sportex exhaust comes out straight, pretty loud with just a straight through centre section and the backbox. I'll try getting a picture tomorrow to put up
|
chrex
Member
Registered: 26th Aug 07
Location: Brawdy/Wirral
User status: Offline
|
if you can find one...magnex were straight out...and probs the best quality tbh!
|
Scotty C
Member
Registered: 6th Nov 05
Location: Kidderminster Drives: 1.6 16v Sport
User status: Offline
|
Dilemma! May just fuck it and go custom
|
gez bay
Member
Registered: 14th Feb 08
Location: South Wales drives: Vxr
User status: Offline
|
dont bother going custom. Save your money
Just buy an ashley system. Mine had a middle box
and was loud on full load.
|
gez bay
Member
Registered: 14th Feb 08
Location: South Wales drives: Vxr
User status: Offline
|
they have nice tips to select from aswel
|
philip2
Member
Registered: 1st Oct 06
Location: n.wales/chester
User status: Offline
|
if your planning engine mods...proper ones, then you want a 2.25 system. im getting one made for mine soon as ive finished building my engine, but then i should be looking at about 180bhp and 2.5 is too big.
|
Scotty C
Member
Registered: 6th Nov 05
Location: Kidderminster Drives: 1.6 16v Sport
User status: Offline
|
I'm going to put my old X16XE in eventually and that's got adtermarket inlet, C16XE gasflowed port & polished head with 4-2-1 manifold. Then when the engine is up and running I'll get it cammed with a raised rev limit and have a map. Still worth getting a 2" bore?
I would get an Ashley but a lot of people are saying the tips don't come out straight...
|
Eck
Premium Member
Registered: 17th Apr 06
Location: Lundin Links, Fife
User status: Offline
|
Why do none of these companies (just went on the exhausts uk site, which was infuriatingly childish) cater for Volvo's!? I would go custom if I was you Scott. That way you know what you're getting! If it's a decent company of course.
|
Scotty C
Member
Registered: 6th Nov 05
Location: Kidderminster Drives: 1.6 16v Sport
User status: Offline
|
Yeh the main page put me right off. And they don't even do an outwardly rolled tip
Yeh I'm thinking custom too. My old one was custom and it was cock on.
|
jon-valver
Member
Registered: 28th Mar 10
Location: West Yorkshire
User status: Offline
|
ive got a scorpion full system id go that way tbh. looks good and is not too loud but when you boot it it gives a nice rasp.
|
John G
Member
Registered: 18th Jul 05
Location: Wirral, Merseyside
User status: Offline
|
my advice would be get one custom built onto the car, dont buy one off the shelf
[Edited on 29-08-2010 by John G]
|
philip2
Member
Registered: 1st Oct 06
Location: n.wales/chester
User status: Offline
|
you may be ok with 2inch, but if planning on more work eventually id go 2.25 really
|