c20letandy1988
Member
Registered: 14th Apr 09
Location: Wirral, Merseyside drives: corsa turbo
User status: Offline
|
Hi guys im struggling at the moment on were to mount this oil pressure sensor i bought a sandwich plate adaptor for sensors to go into put i cant get the sensor clear of missing driveshaft or missing oil cooler pipes is there any flexi pipe i can get that will screw into sandwich plate and lets me mount the sensor in engine bay or something?
|
sxiadam
Member
Registered: 18th Apr 08
Location: Medway (Kent)
User status: Offline
|
what i did on mine was take the original vauxhall oil pressure light sensor out of the pump and put the new sender in. it dosnt fit straight in but i found adapter lying round the garage to screww on to the sender then screwed the whole thing in the oil pump. hope this helps
|
Partyvan
Banned
Registered: 21st Feb 09
Location: Nottinghamshire
User status: Offline
|
If you see my Calibra build thread on migweb (username Nemesis) you'll see how i mounted the sandwich plate, oil cooler plate and sender. It is possible!
|
c20letandy1988
Member
Registered: 14th Apr 09
Location: Wirral, Merseyside drives: corsa turbo
User status: Offline
|
cheers boys  what connection did you find in garage?
|
sxiadam
Member
Registered: 18th Apr 08
Location: Medway (Kent)
User status: Offline
|
it was like a nut that had thread on the outside too. i screwed this onto the sender then screwed the nut thread thing into the oil pump. pictire paints a thousand words so i will try and get pic
|
c20letandy1988
Member
Registered: 14th Apr 09
Location: Wirral, Merseyside drives: corsa turbo
User status: Offline
|
yeh i had one on them like a step up reducer but the body of the sensor hits the engine :S
|
