jonnyboyy
Member
Registered: 25th Apr 10
Location: Leyland, Lancashire
User status: Offline
|
I have put an x16xe in my corsa. Started it and it ran mint but at 4k revs it was asif there was a limiter i changed the ht leads and coil pack, started it again, but this this time it reved to 4 then 2 and 3 arnt firing. Amd its smoking very white. I code red it and it says p0200 injectots?
Any ideas? Cheers
|
benton101
Member
Registered: 26th Aug 09
Location: Scotland - laurencekirk
User status: Offline
|
sorry to point out the obvios, have you changed the plugs? might help
if it says its injectors then putting cleaner into your fuel or sending them away to be cleaned or try new ones, second hand ones are not dear.
[Edited on 18-04-2011 by benton101]
|
jonnyboyy
Member
Registered: 25th Apr 10
Location: Leyland, Lancashire
User status: Offline
|
I have tried the plugs and tried changing 2 and 3 injector. Dunno if injector cleaner will help but worth a shot.
|
jonnyboyy
Member
Registered: 25th Apr 10
Location: Leyland, Lancashire
User status: Offline
|
Still not running right with the injector cleaner.
|
daine
Premium Member
Registered: 28th Feb 07
Location: rossington
User status: Offline
|
Now then jonnyboyy, what year is your car ? and what year is the engine mate.
Under the inlet manifold is a knock sensor, 1994 to 1996 it run`s one type and then 1997 to 2000
it run`s another, they bother plug into the loom, but the later one in an early loom stops it reving.
( I put a `v`reg tigra engine in an `n` reg corsa sport, took me 2 hrs to find).
hope this helps
|
jonnyboyy
Member
Registered: 25th Apr 10
Location: Leyland, Lancashire
User status: Offline
|
My car is v reg. I think i pulled the knock sensor off a c16xe tho.
|
jonnyboyy
Member
Registered: 25th Apr 10
Location: Leyland, Lancashire
User status: Offline
|
Its not the knock sensor:-/ clueless now.
|
jonnyboyy
Member
Registered: 25th Apr 10
Location: Leyland, Lancashire
User status: Offline
|
Sorted it the ecu was dead. Cheers for the help
|
