belton
Member
Registered: 23rd Jul 09
Location: Kent
User status: Offline
|
Basically I wanna fabricate some 'fins' to my rear bumper on my astra (project thread en route)
Where would be the best place to buy a sheet of theroplastic about 2cm thick but only need about 30cm2 sheet anyway, so online is a possibility. I can't seem to find places anywhere!
Cheers
|
ed
Member
Registered: 10th Sep 03
User status: Offline
|
You can get acrylic from a few places on eBay. RS also sell it.
|
ed
Member
Registered: 10th Sep 03
User status: Offline
|
Though I doubt you'll find 2cm thick easily, do you mean 2mm? For that thickness you will want polycarbonate or HIPS which can be found from eBay or RS too.
|
belton
Member
Registered: 23rd Jul 09
Location: Kent
User status: Offline
|
No 2 cm definatly . . I have seen someone using a clear plastic for doing the same sort of thing. Actually just looked at a tape measure n 1cm would do. Then again I'll happily have 2x5mm n join them. Together . . .
Ed if you could link me to something well suited I would really really appreciate it. Thanks alot
|
Ben G
Member
Registered: 12th Jan 07
Location: Essex
User status: Offline
|
do you mean like this kind of thing?
http://cgi.ebay.co.uk/Mk6-Fiesta-ST-zetec-S-rear-diffuser-fins-/300547412555?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item45fa05924b#ht_799wt_1139
|
ed
Member
Registered: 10th Sep 03
User status: Offline
|
From RS:
6mm Acrylic Sheet: http://j.mp/mqeulz
5mm Acrylic Sheet: http://j.mp/iZjHQU
Actually found some 20mm thick on Ebay too: http://j.mp/isvZaN
|
belton
Member
Registered: 23rd Jul 09
Location: Kent
User status: Offline
|
Not that obvious ben, more like ones from a corsa vxr . . .
Ed I really really appreciate that mate, I think I am gunna go for the eBay one as I will have about 3 fins either side of the diffuser. Thanks alot again mate
|
sand-eel
Member
Registered: 15th Mar 07
Location: carluke/braidwood--IRNBRULAND
User status: Offline
|
There are tons of online plastic shops...
This is where I get mine, this will prob do you...
http://www.directplasticsonline.co.uk/HDPESheet/Black/20mm/
|