arizona ste
Member
Registered: 15th Jan 10
Location: Delves, County Durham
User status: Offline
|
hi just recently pun a new engine in my car with a new wiring loom. it started and drove after alot of work but then cut out about half an hour later if i pour petrol down it it will start and cut out i then found out the fuel pump wire was red and blue so i traced it back and it goes to a relay when it starts briefly theres power there then the light on the tester stops and 2 seconds later the car cuts out i have tried putting that to a permanant live and that wont start it and yes i have changed the relay so its obviously a fueling issue anyone had this before should that wire be doing what it is please help... thanks
|
Jabba
Member
Registered: 27th Nov 09
Location: co.durham
User status: Offline
|
try changing the actual fuel pump
|
arizona ste
Member
Registered: 15th Jan 10
Location: Delves, County Durham
User status: Offline
|
you can hear it going when i put the live to it so its still working
|
Ian
Site Administrator
Registered: 28th Aug 99
Location: Liverpool
User status: Offline
|
What engine? Could be immobiliser if it's a late one.
You got EML wired in?
|
arizona ste
Member
Registered: 15th Jan 10
Location: Delves, County Durham
User status: Offline
|
welll originally its a 1.2 16valve but i put a 16 8v in and used a 8v interior loom as well because mine was chopped and alsorts
|
arizona ste
Member
Registered: 15th Jan 10
Location: Delves, County Durham
User status: Offline
|
is there anyway to bipass the wires for my fuel pump to get it to start the engine
|
