corsav6_mut
Member
Registered: 17th Feb 10
Location: lincoln
User status: Offline
|
Make - Audi
Model - A3
Engine - 1.8T
Mileage - 134000
Price - 1100
Location - (same as my profile)
Contact phone number - 07838678740
Contact email address -
General information -
I've decided to sell my A3 as I fancy a change.
First of all it's modified all carried out by myself. The car was standard when I purchased it last Feb.
The mods are as follows;
FK coilovers
Skoda octavia VRS alloys recently referbed (set of 5)
Smoothed front bumper
Leon cupra R splitter
TRS tow strap
Facelift headlights with projectors
6000k HIDS dipped and main ( proper kits from motor factors not cheap Chinese rubbish)
Boost gauge mounted in centre
Powerflow exhaust with tip behind bumper, centre box removed.
Polybushed steering rack and dogbone mount
Dewipered rear
Pipercross cone induction kit
The rear windows have been very lightly tinted recently which are not shown in the pictures.
I fitted new quad core plugs around 4000 miles ago. Oil and filter were changed less that 2000 ago. New thermostat and CTS fitted this month.
There are no fault codes, regularly checked with vag-com.
The engine is faultless boosts when it should through all the gears with no smoke or surges.
12 Months MOT, Tax until the end of may. I will re-tax for the right deal.
Now the bad bits;
The exhaust occasionally touches the axle which is a common problem when sat this low.
Car vibrates very slightly when pulling away, this is due to the poly bushed dogbone mount. This is a common problem and easy to change back to an OEM bush.
I have tried to be as honest as I'm not trying to mess anyone about. I will happily answer any questions and upload more photos if requested.
I need it gone by saturday as its in the way! so willing to listen to reasonable offers!
|
