20XE Electronic Speedo? - Corsa Sport - for Vauxhall and Opel Corsa B, Corsa C and Corsa D

Not logged in [Login - Register]

You Are Not Registered Or Not Logged In

Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » 20XE Electronic Speedo?

New Topic

New Poll

Subscribe | Add to Favourites

You are not logged in and may not post or reply to messages. Please log in or create a new account or mail us about fixing an existing one - register@corsasport.co.uk

There are also many more features available when you are logged in such as private messages, buddy list, location services, post search and more.

Mark.W

Member

Registered: 3rd Jan 07
Location: County Durham
User status: Offline

6th Oct 12 at 18:06

How and what is needed to get the speedo to work on a 20XE in corsa B?

Will94

Member

Registered: 1st Nov 02
Location: Nr. Ipswich, Suffolk
User status: Offline

7th Oct 12 at 10:03

As far as i know, just use the transducer from the corsa's orignal gearbox. Unless yours is a 1997 on one with abs, because then the speedo is done thru the abs sensors

Mark.W

Member

Registered: 3rd Jan 07
Location: County Durham
User status: Offline

7th Oct 12 at 12:51

Mines a 1997 without ABS Will.

Mikey_j

Member

Registered: 1st Nov 08
Location: Ipswich
User status: Offline

7th Oct 12 at 21:02

If you cant use the transducer off of the original box then you need to use a corsa gsi hub with abs sensor and a relay off of a corsa c/astra g/meriva without abs and wire it in. Theres a guide on mig iirc

one-mr-t

Member

Registered: 4th Aug 09
Location: Greater Manchester
User status: Offline

8th Oct 12 at 06:45

Or just get cable clocks and have a cable driven speedo

Mark.W

Member

Registered: 3rd Jan 07
Location: County Durham
User status: Offline

8th Oct 12 at 08:53

Any links to that guide on mig web?

Vauxdan88

Member

Registered: 13th Feb 11
Location: Weymouth Dorset
User status: Offline

9th Oct 12 at 22:56

I did this the other week mate,go to a scrappy and find a 1.4 8v Corsa (that's what I got it off anyway). They have the black transducer in the gearbox,just cut the wires a few inches above it,remove it with the white bit attached that goes into the box,fit it into your box and wire colour for colour (3 wires). On the loom it's the plug with the orange bit,just cut the plug off.

Mark.W

Member

Registered: 3rd Jan 07
Location: County Durham
User status: Offline

9th Oct 12 at 23:42

Thanks for that Dan