madcorsakid
Member
Registered: 25th Oct 09
Location: Ayr
User status: Offline
|
When my cars runing and my afm is plugged in it idles fine but wont rev right and sounds as if its running on 3 cylinders but when you take it out it ruff idles but will rev no bother, brand new afm put in it, when the throttle position sensor was unplugged is doesnt change anything and when its plugged in it does the same, the throttle position sensor is getting volt but looks like it aint doing nothing, could the tps be my problem
|
madcorsakid
Member
Registered: 25th Oct 09
Location: Ayr
User status: Offline
|
Bump
|
daine
Premium Member
Registered: 28th Feb 07
Location: rossington
User status: Offline
|
On the c2.0xe, when you unplug sensor's, the engine will still run on basic setting's from the ECU!
the air flow meter is connected to the throttle possession sensor, when one's not working, will cores
a knock on effect.
remove the plug off TPS, connect a multi-meter to and do a ohms reading to check if it's that.
(TPS is a variable resistor). hope this helps 
[Edited on 05-03-2013 by daine]
|
corsa-vxr
Member
Registered: 15th Apr 11
Location: ayr
User status: Offline
|
What do u mean a hommes reading bud and the tps does nothing plugd or unplugged when afm is unpluggd it runs lumpy but pulls proper but when pluggd in it bogs down changd coolant temp sensor today nw it runs better but stil isnt getin full power
|
Christopher
Member
Registered: 14th Oct 10
Location: Eastbourne
User status: Offline
|
Are you running lamba sensor?
|
corsa-vxr
Member
Registered: 15th Apr 11
Location: ayr
User status: Offline
|
Yea tryed unplugin that 2 made no difrence
|
Christopher
Member
Registered: 14th Oct 10
Location: Eastbourne
User status: Offline
|
quote: Originally posted by corsa-vxr
Yea tryed unplugin that 2 made no difrence
Possibly the same as mine? Mine ran shit with it plugged in and unplugged as it had been used without lamba so i had to earth a pin in the ecu mate!
|