johnny86
Premium Member
Registered: 15th Feb 10
Location: in a bus stop.
User status: Offline
|
Is it much harder to do than a b?
|
Buzz
Member
Registered: 8th Dec 99
Location: York
User status: Offline
|
probably
|
Lee_fr200
Member
Registered: 8th May 11
Location: West Yorkshire
User status: Offline
|
Powercrazy in Lincoln have done quite a few of them ranging from the 2.5 to 3.2 but why would you want to compared to the z20let there's no real point
|
davegreen
Premium Member
Registered: 20th May 12
Location: Oxfordshire
User status: Offline
|
I found fitting the z22se to the c much easier than the x20xev to the b. would imagine its not that hard to fit a v6 either. seen a few about at shows.
nice sound the v6
|
LukesCorsaSXi
Member
Registered: 2nd Jan 11
Location: Sheffield
User status: Offline
|
quote: Originally posted by davegreen
I found fitting the z22se to the c much easier than the x20xev to the b. would imagine its not that hard to fit a v6 either. seen a few about at shows.
nice sound the v6
Fit me one.
|
Jed D
Member
Registered: 15th Mar 11
Location: Durham
User status: Offline
|
quote: Originally posted by Lee_fr200
but why would you want to compared to the z20let there's no real point
http://www.youtube.com/watch?v=kz12dIBah2s
because V6s are quicker than tuned zlet's
...not to mention the price you'd spend on a zLETdown
[Edited on 11-11-2013 by Jed D]
|
Generation
Member
Registered: 7th Jul 09
Location: Essex
User status: Offline
|
That was very close, and he has an interior by the looks
Of
It too...
|
Jed D
Member
Registered: 15th Mar 11
Location: Durham
User status: Offline
|
he also running about 300 bhp i think and probably has well into the 4 figure digit of money in it... mine was under fueling liek fuck at that point of the day
|
davegreen
Premium Member
Registered: 20th May 12
Location: Oxfordshire
User status: Offline
|
quote: Originally posted by LukesCorsaSXi
quote: Originally posted by davegreen
I found fitting the z22se to the c much easier than the x20xev to the b. would imagine its not that hard to fit a v6 either. seen a few about at shows.
nice sound the v6
Fit me one.
which engine do you want to fit luke?
|
Lee_fr200
Member
Registered: 8th May 11
Location: West Yorkshire
User status: Offline
|
quote: Originally posted by Jed D
quote: Originally posted by Lee_fr200
but why would you want to compared to the z20let there's no real point
http://www.youtube.com/watch?v=kz12dIBah2s
because V6s are quicker than tuned zlet's
...not to mention the price you'd spend on a zLETdown
[Edited on 11-11-2013 by Jed D]
I beat quite a few cars in my zlet which was running 300hp wouldn't have thought the v6 would keep with it tbh
Mine did 0-60 in 4.9 secs verified by race logic meter
|
Jed D
Member
Registered: 15th Mar 11
Location: Durham
User status: Offline
|
quote: Originally posted by Lee_fr200
quote: Originally posted by Jed D
quote: Originally posted by Lee_fr200
but why would you want to compared to the z20let there's no real point
http://www.youtube.com/watch?v=kz12dIBah2s
because V6s are quicker than tuned zlet's
...not to mention the price you'd spend on a zLETdown
[Edited on 11-11-2013 by Jed D]
I beat quite a few cars in my zlet which was running 300hp wouldn't have thought the v6 would keep with it tbh
Mine did 0-60 in 4.9 secs verified by race logic meter
mine got 0-60 in 4.2970 at york raceway. 12.9et
fairly stock V6 (c25xe)
|
Corsa_Sport21
Member
Registered: 13th Apr 08
Location: Leven, Fife. Drives : 205 GTi
User status: Offline
|
Fairly stock
|
Jed D
Member
Registered: 15th Mar 11
Location: Durham
User status: Offline
|
G cams only on the inlets, from a 2.5 v6 vectra gsi, c20xe flywheel, fse regulator and a 3l lower divider... fairly stock to me
|
taylorboosh
Member
Registered: 3rd Apr 07
User status: Offline
|
Engine was stock, hes not lying
|
Jed D
Member
Registered: 15th Mar 11
Location: Durham
User status: Offline
|
apart from the G cams, the 3l lower divider, the flywheel, the inlet set up and the metal covers i only gave £70 for that engine
took some fucking abuse too
|
taylorboosh
Member
Registered: 3rd Apr 07
User status: Offline
|
Took some getting running too iir
|
Jed D
Member
Registered: 15th Mar 11
Location: Durham
User status: Offline
|
quote: Originally posted by taylorboosh
Took some getting running too iir
nope, not a problem, your thinking of the one i had before that, tried everything, turned out to be a damaged trigger wheel on the crank
|
taylorboosh
Member
Registered: 3rd Apr 07
User status: Offline
|
Ahhh yea
|
Corsa_Sport21
Member
Registered: 13th Apr 08
Location: Leven, Fife. Drives : 205 GTi
User status: Offline
|
Probably had your mates fancy ECU in aswell.
|
Jed D
Member
Registered: 15th Mar 11
Location: Durham
User status: Offline
|
quote: Originally posted by Corsa_Sport21
Probably had your mates fancy ECU in aswell.
proved that ecu makes no difference at pvs, did 13 on and 13 off... the one that was on a stock ecu was a more flat 13
|
99sport
Member
Registered: 8th Sep 13
Location: West Sussex
User status: Offline
|
What's the handling like with the v6?
|
Jed D
Member
Registered: 15th Mar 11
Location: Durham
User status: Offline
|
Never really built mine for handling and tbh, i wouldnt of dared use it on the road but i wouldnt say its as bad as some people make out, they are fairly front end heavy though
|
Jed D
Member
Registered: 15th Mar 11
Location: Durham
User status: Offline
|
heres one in a C i just spied on FB
3.2 V6 224BHP
|
LukesCorsaSXi
Member
Registered: 2nd Jan 11
Location: Sheffield
User status: Offline
|
quote: Originally posted by davegreen
quote: Originally posted by LukesCorsaSXi
quote: Originally posted by davegreen
I found fitting the z22se to the c much easier than the x20xev to the b. would imagine its not that hard to fit a v6 either. seen a few about at shows.
nice sound the v6
Fit me one.
which engine do you want to fit luke?
Z22SE I love your red C haha!
|
Dom
Member
Registered: 13th Sep 03
User status: Offline
|
quote: Originally posted by davegreen
I found fitting the z22se to the c much easier......
That the same engine fitted to the VX220? If so, how much space is left in the C's engine bay once fitted? Any room to bolt on a SC (believe Chris_UK on here bolted a Eaton SC to his VX)?
[Edited on 13-11-2013 by Dom]
|