leafgreencorsa
Member
Registered: 5th Aug 02
Location: Somerset/Wilts Border
User status: Offline
|
I've got a set of the alloy locking pins for my 5dr Corsa C. Last night I fitted the first one but it took ages (especially trying to re-fit the dor card). The new pins just slot on and you tighten them on by screwing in a small allen bolt but the originals seem to be screwed on. Anyone fitted these locking pins without having to remove the door cards? If so, how do you get the original pins off (I don't want to do any damage, the car's only just over a week old). It's a 1.7DTi SXi and it goes soooo well compared to my old 1.4 8v (900 miles already!). Thanks for your advice people.
|
Stu_22
Member
Registered: 25th Mar 02
Location: Luton
User status: Offline
|
I guess the corsa C would be the same as B if so wedge the red plastic bit off of the pin and it should then just pull off
Then put the irmischer one on and secure with the allen key.
Dead easy no need to take the door card off
|
paul_spurrell
Member
Registered: 14th Sep 01
Location: Bath Avon
User status: Offline
|
like stu said you dont need to take the door card off. just prise off the orange clip on the old one then pull off
|
leafgreencorsa
Member
Registered: 5th Aug 02
Location: Somerset/Wilts Border
User status: Offline
|
Thanks for that.
There is a red square on the original locking pins. I'll try levering that out of the one I've already removed.
|
Jason Iles
Member
Registered: 19th Jun 01
Location: Bristol
User status: Offline
|
As the guy above said I took mine off this way without touching the door card
|
