AdiSRI
Member
Registered: 1st May 02
Location: Berkshire
User status: Offline
|
Has anyone else had this trouble??
He had to change the mountings slightly to allow the bad boy bonnet to not touch the lights when the bonnet is closed.
We have used all the adjustment on the units to no avail, still too high!
Has anyone else with morettes and a bad boy had similar trouble? And how did u fix it??
|
Nobby
Member
Registered: 14th May 00
Location: 17 Boring road, Dullsville, Snorefolk
User status: Offline
|
I had this problem without having the badboy bonnet!
In the end we had to put cable ties round the lamp unit and then thread it thorugh the bonnet slam pannel above the light units to force the beam down.
|
AdiSRI
Member
Registered: 1st May 02
Location: Berkshire
User status: Offline
|
Ah i getcha m8, maybe i can do this, was it just a temporary measure or did u leave it like it??
As my mates say my lights are dazzling due to the angle and its not good for other road users as is.
|
Nobby
Member
Registered: 14th May 00
Location: 17 Boring road, Dullsville, Snorefolk
User status: Offline
|
Left it like it. The cable ties are under tension so they won't come off and it passed the MOT.
As they say, "If it ain't broke, don't fix it."
|
shawboy
Member
Registered: 1st Jul 02
Location: Wombwell, Barnsley
User status: Offline
|
its a common fault on morrettes lights.
my lights aim too high and dazzle people.
|
AdiSRI
Member
Registered: 1st May 02
Location: Berkshire
User status: Offline
|
Well i have put it back on the original mounts and its lots lower aim now.
Going in for 3rd test thursday, if it fails yet again, then out with the tie wraps!!
|
Karnage Corsa
Member
Registered: 4th Nov 02
Location: Norton, Stockton-on-Tees
User status: Offline
|
I had this prob failed 3 times it was torture but passed even though they were slightly high
[Edited on 09-09-2003 by Karnage Corsa]
|
Dave Hay
Member
Registered: 10th Apr 02
Location: Aberdeenshire
User status: Offline
|
why not put standard lights back in for mot.........
|