dna23
Member
Registered: 1st Nov 04
Location: Northamptonshire
User status: Offline
|
alrite everyone, i'm sure someone on here will be able to tell me, i have some FK springs and shocks on the way to lower my corsa b 60/40 thats 60mm at the front and 40mm at the back btw... anyway at the moment its on 16" alloys with an offset of et45 (195/45/16) the only thing im interested in is will it need arch work? either majorly as in rolling the arches or maybe jus unbolting the plastic guards and tiger sealing them .etc down??? another point is i have quite a bit of ice in the boot so its weighed down more at the back, i'd say it goes about an inch or maybe a little more or less because of it (just to bare that in mind)
any help anyone can give is great - thanks
p.s. also if it does need arch work such as rolling how much is this likely to be?
|
Joff
Member
Registered: 17th Oct 00
Location: Cambridgeshire
User status: Offline
|
Mine was fine, but Mark's got problems with his, so you'll have to just wait and see
http://www.corsasport.co.uk/board/viewthread.php?tid=199626
|
sri_racer
Member
Registered: 6th Oct 04
User status: Offline
|
shudnt need arch work as long as u dont go 2 low
|
MJ
Member
Registered: 18th Sep 03
Location: Hampshire Drives: ITR DC2 + Skoda Felicia
User status: Offline
|
i found last night that my car was rubbing at the back with one in the back, so i had a look today ith my old man and it was rubbing on the metal lip behind the arch, so this is now flat and should be fine just have to try it
|
corsaSXI.com
Member
Registered: 30th Dec 04
Location: cleveland (north east)
User status: Offline
|
what size wheels and how much have u lowered by?
|
MJ
Member
Registered: 18th Sep 03
Location: Hampshire Drives: ITR DC2 + Skoda Felicia
User status: Offline
|
all info is in here http://www.corsasport.co.uk/board/viewthread.php?tid=199626
|
Lee 16v
Member
Registered: 25th Jun 04
Location: Maidstone Drives: Corsa 2.0 16v
User status: Offline
|
u can never quite tell exactly, but i wud say u wud need little or no arch work, should be ok
|