gsi- fish
Member
Registered: 10th Apr 05
Location: colne(burnley)
User status: Offline
|
does anyone no if injectors from a 2.0 red top can be fit to a corsa gsi ecotecto improve performance or if the injectors off any other bigger engine can be fit to improve performance thanks
|
russb
Member
Registered: 30th Oct 04
Location: chester-ish
User status: Offline
|
dont think it will make much difference unless your engine is that modded it has a need for more fuel?
|
gsi- fish
Member
Registered: 10th Apr 05
Location: colne(burnley)
User status: Offline
|
its got chip filter n de cat
|
Dave A
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 10th Dec 03
Location: County Durham
User status: Offline
|
quote:
Originally posted by gsi- fish
its got chip filter n de cat
only looking at bout 6 bhp over standard then. best bet is to get the cash together for a new inlet system before worrying about any other engine mods.
my gsi will be running at about 160 bhp when it is finished next week, im still on standard injectors.
|
James R
Member
Registered: 4th Feb 03
Location: 205GTi16/306GTi16
User status: Offline
|
quote:
Originally posted by gsi- fish
does anyone no if injectors from a 2.0 red top can be fit to a corsa gsi ecotecto improve performance or if the injectors off any other bigger engine can be fit to improve performance thanks
Yes any high impedance injector will work
And Yes it will make it over fuel and have crap response, kill power and do very poor mpg.
|
gsi- fish
Member
Registered: 10th Apr 05
Location: colne(burnley)
User status: Offline
|
wot you done to it
|
topshot_2k
Banned
Registered: 1st Dec 03
Location: Northampton Drives: Pug GTi-6
User status: Offline
|
quote:
my gsi will be running at about 160 bhp when it is finished next week, im still on standard injectors.
cool, how you getting that power? tb's?
|
James R
Member
Registered: 4th Feb 03
Location: 205GTi16/306GTi16
User status: Offline
|
Think it's running optamisum
|
Dave A
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 10th Dec 03
Location: County Durham
User status: Offline
|
quote:
Originally posted by j1400
Think it's running optamisum
no optimism envolved
just a massive engine spec
was gonna keep it a secret till its on the road, but here goes:
x16xe from a 1999 corsa sport.
arp rod bolts
lightened balanced bottom end
raised compression (by head skims)
sbd aluminium rollers
sbd solid tensioner kit
sbd 4 branch manifold
gas flowed, ported polished head (egr ports reamed to allow greater inlet ports)
enlarged inlet and exhaust ports matched to manifolds
bigger inlet/ exhaust valves
sai pump and egr system removed
modified mantzel powerbox
cnc machined larger throttle body
lower half of inlet manifold matched to head/ mantzel
de-cat
full exhaust
de-restricted airbox with K&N panel filter
totally custom engine management with raised rev limit
and a few other goodies
|
