Ry_B
Banned
Registered: 1st Dec 05
Location: Solihull, W Mids Drives: 45BHP beast!
User status: Offline
|
My mate has a 1.4 16 valve Tigra.
It makes a really tappetty type noise when it's on, not just when first started, and it gets louder with the RPM.
Her Dad reckons it could be the camshafts
Any input appreciated
|
Gaz
Member
Registered: 24th Aug 03
Location: Widnes, Cheshire
User status: Offline
|
could just need an oil change mate,
or some oil in it? - as i found this to be the case with mine.
|
Ry_B
Banned
Registered: 1st Dec 05
Location: Solihull, W Mids Drives: 45BHP beast!
User status: Offline
|
Nah the oil was changed 2k miles ago with some high quality stuff and I checked it and the level is fine. No oil warning lights either.
She drives it really hard, even from cold though if that gives any clues?
|
danny boyo
Member
Registered: 15th Nov 02
User status: Offline
|
might be a faulty tappit they get warn
|
johnny27
Member
Registered: 5th Feb 06
User status: Offline
|
Even a worn thurst pad or rocker can do it, but probaly tappets. I'm finding out after fitting a 285 cam to my 1.2 8 valve, i did'nt bother to change the rockers with it and now the bit*h is tapping like a mother fecker, as the old rockers had took the shape of the old cam. BTW i have'nt worked on a vaux 16v engine but you may have enough room to replace the tappets with a rocker remover tool, if not then just compress valves, lift out the rockers, slip out the cam and replace tappets and build bck up, save's you having to removed head, new head gasket, new head bolts, new cam belt and so on.
|
Fill589
Member
Registered: 3rd Apr 06
Location: grimsby North lincs
User status: Offline
|
this dont sound good mate has the engine only just started doin it since the oil change ?? if so the oil u put in could posabley be to thin or could be sinthetic (which it probebly is if it was exspencive ) and probably needs mineral oil . i made that mistake with my bro's astra 16v when i got the wrong oil from work !!
|
Ry_B
Banned
Registered: 1st Dec 05
Location: Solihull, W Mids Drives: 45BHP beast!
User status: Offline
|
Nah it's the right oil!
It was running fine for 1800 miles, has only started in the last 200!
|
Nick A
Member
Registered: 28th Nov 04
Location: Hertfordshire
User status: Offline
|
tappets...
|
Sly_SRi
Premium Member
Registered: 9th Apr 04
Location: Reading, UK Drives: Corsa C
User status: Offline
|
this happens on the x14xe, same occured on my Corsa SRi. They use hydraulic tappets which don't require the valve clearances to be set up, however if they wear past a certain point they will still tap.
Corsa C Z20Let
Black Sleeper Turbo Project
|