Rob_Lee
Banned
Registered: 9th Dec 05
Location: Folkestone Drives: Nova 1.6 16v
User status: Offline
|
I can get a VERY cheap superchip at work for the C16xe
Yes or no or hold out for remap?
Rob
|
Dean_W
Member
Registered: 13th Dec 05
Location: Downham Market, Norfolk
User status: Offline
|
I would do it if it was cheap enough.
|
Rob_Lee
Banned
Registered: 9th Dec 05
Location: Folkestone Drives: Nova 1.6 16v
User status: Offline
|
Can you get them to raise the rev limit when its superchipped?
Rob
|
Dean_W
Member
Registered: 13th Dec 05
Location: Downham Market, Norfolk
User status: Offline
|
I'm sure it's already in the chip, depends on the spec.
A re-map is a specific map made for your car.
A chip has a pre made map for a the car.
|
AK
Member
Registered: 5th Jul 00
Location: Aberdeen City
User status: Offline
|
depends what type of superchip...
but yes, same can be flashed..... to suit new requirements
|
Rob_Lee
Banned
Registered: 9th Dec 05
Location: Folkestone Drives: Nova 1.6 16v
User status: Offline
|
is there different types then?
What do you mean by "it can be flashed?"
Rob
|
AK
Member
Registered: 5th Jul 00
Location: Aberdeen City
User status: Offline
|
EPROM - elec programmable read only mem
These are known as Customer Key superchips. They program the chip via the port on the car.....
|
AK
Member
Registered: 5th Jul 00
Location: Aberdeen City
User status: Offline
|
think of it like going to vaux for a service and they install a new ECU map for whatever reason! Same method
|
Rob_Lee
Banned
Registered: 9th Dec 05
Location: Folkestone Drives: Nova 1.6 16v
User status: Offline
|
I think the C16xe is a chip change
Ill check with the boss man
Is there any differance between downloads/chip change?
[Edited on 04-10-2006 by Rob_Lee]
|
Dave A
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 10th Dec 03
Location: County Durham
User status: Offline
|
the c16xe one is a chip with a raised limit of 7200rpm. not programmable via the ODB.
personally I wouldnt bother, most engines I have taken apart that have had a superchip used with them show signs they have ran rich, and the gains if any are minimal. only worth it for the raised limit IMO but to use that you will be best to fit ARP's and SBD rollers
|
Rob_Lee
Banned
Registered: 9th Dec 05
Location: Folkestone Drives: Nova 1.6 16v
User status: Offline
|
Yeah the plan is ARP's and SBD rollers
Boss says he can do it for £150 all in
|
Dave A
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 10th Dec 03
Location: County Durham
User status: Offline
|
what, £150 for a second hand superchip?
I sold a complete superchipped c16xe ecu for £50.
|
Rob_Lee
Banned
Registered: 9th Dec 05
Location: Folkestone Drives: Nova 1.6 16v
User status: Offline
|
nah brand new fitted
|
Tommy
Member
Registered: 24th Aug 00
Location: Essex, Colchester
User status: Offline
|
Still not very cheap.
|
L30 SCT
Member
Registered: 27th Nov 05
Location: aberdeen
User status: Offline
|
save the money mate and get a unichip. you wont be happy with the gains from a superchip. i had one and sold it a week later
|
Rob_Lee
Banned
Registered: 9th Dec 05
Location: Folkestone Drives: Nova 1.6 16v
User status: Offline
|
how mcuh does the Unichips work out?
|
broster
Premium Member
Registered: 6th Dec 02
Location: Drives: E39
User status: Offline
|
150 fitted brand new is cheap, rrp is 293 fitted.
although id pay 450 and get it mapped to suit your car with a limited set to what ever is suited
|
RobHayes
Member
Registered: 6th Sep 03
Location: Lincolnshire
User status: Offline
|
i dont have ARP bolts or SBD idlers, im revving to 7800rpm, loves it
|
broster
Premium Member
Registered: 6th Dec 02
Location: Drives: E39
User status: Offline
|
i reved to 8500 no probs on standard rods and pistons, didnt like 9000 tho, people are to scared of this:
|
L30 SCT
Member
Registered: 27th Nov 05
Location: aberdeen
User status: Offline
|
the unichip i think have went up to £495 fully fitted and mapped. this also includes 2 dyno runs to show you before and after.
arp rod bolts and sbd rollers arent much. i think you will be about £120-£140 for them both.
then you have to look into vernier pulleys unless you already have them
|