csweatherston
Member
Registered: 16th Jan 06
Location: Devon
User status: Offline
|
whats next folks??
ive got a front upper strut brace, spax coilovers front + rear, with coilsprings uk rear springs.
rear strut brace soon... (friday)
seam welded engine bay.
polybushed tie rod mounts, front arb, and rear beam......filled engine mounts with tigerseal 
would the next step be a rear antiroll bar?/..eg whiteline???
|
csweatherston
Member
Registered: 16th Jan 06
Location: Devon
User status: Offline
|
oh, tracking + cambers sorted now too,
camber -1 degree
tracking toe-in 5mins....
|
Robin
Premium Member
Registered: 7th Jan 04
Location: Northants Drives: Clio 182 Cup
User status: Offline
|
decent front/rear ARBs and proper rear coilovers, cage, lighter wheels, lighter brakes, better tyres, quaife diff, then have it set up (corner weighted and camber/castor adjusted)
|
csweatherston
Member
Registered: 16th Jan 06
Location: Devon
User status: Offline
|
ahh, a fair bit to do yet then 
how will proper rear coilovers be an advantage??
rear arb, cage and brakes are all on the 'todo' list lol
better tyres??
|
Robin
Premium Member
Registered: 7th Jan 04
Location: Northants Drives: Clio 182 Cup
User status: Offline
|
have you got the standard front ARB, or a thicker one?
some people say to take it off, but I preferred mine with one...
rear coilovers mean you can have it corner weighted - http://www.grmotorsports.com/news/012005/understanding-corner-weights.php - and then set up better 
lighter wheels and brakes means less unsprung weight, so there's less to 'bounce' and less to turn.
better tyres, what have you got at the moment?
|
csweatherston
Member
Registered: 16th Jan 06
Location: Devon
User status: Offline
|
toyo px4's (new version of the t1r) my front arb is rather chunky......think its the same as a gsi one (26mm??)
appparently, the weight of wheels/ brakes is multiplied x10 whilst rotating, so i can see how that helps...
still dont fnacy rear coilover units yet tho lol
|
Robin
Premium Member
Registered: 7th Jan 04
Location: Northants Drives: Clio 182 Cup
User status: Offline
|
GSi ARB is 22mm IIRC, I had a 24mm one, it was good, but like I say, some people reckon it's better without one.
|
csweatherston
Member
Registered: 16th Jan 06
Location: Devon
User status: Offline
|
without it, does it make the steering sharper?
im still trying to figure out how to set my brake compensator properly lol
|
Robin
Premium Member
Registered: 7th Jan 04
Location: Northants Drives: Clio 182 Cup
User status: Offline
|
apparently it makes the car turn in better and understeer less, but mine did the opposite
|
Robin
Premium Member
Registered: 7th Jan 04
Location: Northants Drives: Clio 182 Cup
User status: Offline
|
without it ^
|