ShEp
Member
Registered: 9th Aug 05
Location: Dingwall, Highland
User status: Offline
|
Ok got the x16xe back together and it starts
But it doesnt want to run, just bearly runs and it's really really lumpy,
press the throttle and nothing happens, sometimes it will slowly climb up the revs
I have put a new CTS in to no avail,. it's just the same
Checked the cat isn't blocked, and it's not
the timing is spot on, checked the leads are the correct way round and they are
HAs anyone got any ideas? been stumped for a couple of days now, just been checking and re-checking things but cant see anything wrong 
|
Gareth F
Member
Registered: 16th Jan 08
Location: Location Location
User status: Offline
|
Plugs and leads is where i would start, then dis pack, possibly fuel rails/ pump.
Also check for vacuum leaks as this caused me a few problems as the hoses always perish, cut 2" off and stuck it back on and it was perfect.
Hope this helps 
|
