Woody
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 7th Aug 10
Location: Fareham
User status: Offline
|
the amp protection light will not go off, i took all the wires off and reconnected now if i remore the rca cable it stays on also all the speakers it stays on i have done everything but it wont work any ideas ??
thanks
|
Woody
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 7th Aug 10
Location: Fareham
User status: Offline
|
ttt
|
Firefly
Member
Registered: 10th Aug 09
Location: Tasmania, Australia
User status: Offline
|
Enough power being supplied? Wires connected correctly? Car on or off? Or both?
|
Woody
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 7th Aug 10
Location: Fareham
User status: Offline
|
yes it goes from the batt. and all correct i think it may be earth as its only taped to bare metal.
|
Jake
Member
Registered: 24th Jan 05
User status: Offline
|
mate the earth needs to be bolted down to metal. thats why the protection light is on
|
Matty W
Member
Registered: 31st Jan 11
Location: Ashton-in-Makerfield, Greater Manchester
User status: Offline
|
fit an eyelet to the earth cable and undo any small bolt you can find that goes into the body ( i used the rear seat mounting point) . also check where your power and remote cables come into the amp, nake sure no stray copper strands are poking out by insulating most of the end with black insulation tape
|
Woody
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 7th Aug 10
Location: Fareham
User status: Offline
|
all works now  its all good x
|