Mav 3000
Member
Registered: 16th Aug 01
Location: Leicestershire
User status: Offline
|
1) On the front doors I have two wires for the speaker - blue and blue/brown - which ones +ve and which ones -ve?
2) On my old loom I had two cables for the speakers - one to the Vaux tweeter, one to the woofer. On my new loom, I don't seem to have the wiring to the woofer - is it ok to take the 'tweeter' wire (or is it just the woofer wire?) to the crossover box and will I get the full frequency?
3) With spade adaptors, which ones are +ve and which ones are -ve?
4) On the rear speaker wires (Original Vaux Wiring) which coloured wires are +ve and -ve?
Thanks all!
[Edited on 23-06-2003 by Mav 3000]
|
corb
Member
Registered: 24th Apr 02
Location: Calgary, Alberta, Canada
User status: Offline
|
blue brown is neg. plain blue is pos
|
Mav 3000
Member
Registered: 16th Aug 01
Location: Leicestershire
User status: Offline
|
Thaks Corb.
I have re-hooked up my components this afternoon - this is how I did them:
blue = positive, blue/brown = negative
big spade = positive, small spade = negative
on my tweeters, red wire is positive, red/black wire is negative
Hope this is correct!
|
corb
Member
Registered: 24th Apr 02
Location: Calgary, Alberta, Canada
User status: Offline
|
yep
|
IntaCepta
Member
Registered: 25th Mar 02
Location: Mill Hill East, Greater London
User status: Offline
|
hehe u don't fancy ampin' the comps and using speaker wire 
|
Mav 3000
Member
Registered: 16th Aug 01
Location: Leicestershire
User status: Offline
|
Mine aren't amped - just running off the headunit. I get to about 66% volume and not only is it VERY loud, but the woofer starts to distort.
ive got a sony 4.50w HU btw
Thaks ofr the help! It sounds ok so i guess is right
|
