a7syp
Member
Registered: 12th Sep 02
Location: Manchester
User status: Offline
|
Gonna fit my new seats tomoz... but gonna need some help. Got set od Cobra Monco's with subframes. I haven't got a clue so gonna need as much advice as possible on removing old seats and fitting new ones.
Any idea's guys!!!!! PLEASE!!!!!! 
|
drunkenfool
Member
Registered: 7th Feb 03
Location: Hereford Drives: Audi R8 V8
User status: Offline
|
buy the max power guide to modding, £20 and its got loads of tips in it including seats. 
|
GAVINO BAMBINO
Member
Registered: 24th Mar 03
User status: Offline
|
I fitted some cobra monocos to my corsa bout 6 months ago. All you need to do is remove the plastic next to your seat near the door and you will see some kind of cannister, you will also see what looks like a red key, this needs to be put in the slot on top of the cannister there are instructions written on the top. You then need to get an ET40 or ET45 star spanner and undo the two bolts at the back of the seat, the seat should then just slide out of the slots at the front and hey presto, one seat out, do the same to the other side. To fit your new seats simply screw the subframe to the seat before it goes in then bolt it in as you took it out. Do you have harnesses? if not it gets more complicated. My wording maybe a bit confusing but hope it helps. Gav
|
a7syp
Member
Registered: 12th Sep 02
Location: Manchester
User status: Offline
|
Thanks guy's, im gonna have a go today!!  Gav, ive not got harnesses yet, but was planning on getting some in the future!
|
neiliosxi
Member
Registered: 17th Dec 02
Location: Teesside (NE)Drives: Megane R26
User status: Offline
|
if u use harnesses wot do they attach to?
|
a7syp
Member
Registered: 12th Sep 02
Location: Manchester
User status: Offline
|
Just the question i was about to ask? Anybody help us out? 
|
Adam-D
Member
Registered: 11th May 02
Location: Cheshire
User status: Offline
|
quote:
Originally posted by neiliosxi
if u use harnesses wot do they attach to?
they attach to bolt on left and right of seat where ur old seat belt is
and at the back seat seatbelt position
the strut brace is in the way but you get the idea
|
GAVINO BAMBINO
Member
Registered: 24th Mar 03
User status: Offline
|
If you have harnesses they attach where the standard seatbelts usually do appart from the shoulder straps that attach to where the rear seat belt clips are held in place underneath the rear set, if you pull it up youl see where i mean. in exactly the same position as the pic above that adam put up. Its pretty straight forward. If you have a rear strutt brace like adam then you can just loop the harness round that without having to bolt them down. If i knew how to put pics up id show ye. As for not having harnesses all i did as a temporary measure was take out my rear seat belt clips and bolt them to the side of the subframe, on mine the bolts for this were already there. Hope this helps. Gav
|
neiliosxi
Member
Registered: 17th Dec 02
Location: Teesside (NE)Drives: Megane R26
User status: Offline
|
cool, would be a bit uncomfortable for ppl sitting in the back like! lol
thakns for the advice.
|
