kevster
Member
Registered: 3rd Mar 03
Location: Blackburn. Lancs
User status: Offline
|
Bit of a lame one
I need to change the bulbs behind the heater dials - how do I get the panel off?
I guess you just lever it off with a screwdriver?
Just thought i would ask first before I broke summat 
|
Kris TD
Member
Registered: 25th Mar 02
Location: Ware, Hertfordshire
User status: Offline
|
there is lots of screws, buy a haynes manual.
you have to take out the entire center console, its a bitch to do.
|
Greasemonkey
Member
Registered: 17th Apr 02
Location: Drives a Tractor
User status: Offline
|
the heater vents, pull them down to reveal 2 screws behind, undo these, remove MFD, pull off the knob for the sliding heater control and prise off the panel there is 2 more screws, thats all i can remember there might be other screws but it will all become obvious, you gotta unclip all the heater cables at the back, its a nighmare getting them back on!!!!
good luck
|
t44rnt
Member
Registered: 6th Mar 03
Location: London/Essex
User status: Offline
|
more hassle than wot it is worth, imo
|
kevster
Member
Registered: 3rd Mar 03
Location: Blackburn. Lancs
User status: Offline
|
Great stuff - thanks for the help tho
|
rokmarko
Member
Registered: 9th Feb 03
Location: Novo mesto, Slovenia
User status: Offline
|
It's not so hard.
do what greasemonkey says. you don't have to unclip all the cabels just unscrew that white plastic and there you can replace the bulbs.
and yes there is not a lot of space behind
look in tutorials&faq - interior modifications, i think there are pictures of how you do it
|
Greasemonkey
Member
Registered: 17th Apr 02
Location: Drives a Tractor
User status: Offline
|
depends what model ya got, some the bulbs come out the front on mine they come out the back,
|
oztek corsa
Member
Registered: 31st Jan 03
Location: luton
User status: Offline
|
easy to do, takes about 25 minutes, do what grease monkey says,done mine last night,replaced them with blue ones,looks good,thanks to cobra148 for the bulbs!
|
