Adam-D
Member
Registered: 11th May 02
Location: Cheshire
User status: Offline
|
best way? out the top?
out out the bottom and lift the car up? i have a engine hoist
and is it easier to aplit engine and g/box or take it out whole
im removing the bonnet anyway
|
BabyBlade
Member
Registered: 5th Feb 03
Location: Hereford Rides: Ninja 600
User status: Offline
|
i *think* its out the bottom lowering the engine on a jack while the cars on axle stands
|
Dave
Member
Registered: 26th Feb 01
Location: Lancs
User status: Offline
|
Smaller engine come up, bigger engines go down.
My ickle x10xe came out uphill but the 20xe was easier to drop the car over it.
You could probably drop a 1.6 down from above but you would have to clear more stuff ut of the way than if you came from underneath.
|
Adam-D
Member
Registered: 11th May 02
Location: Cheshire
User status: Offline
|
like the batterey and stuff?
with the g/box attached?
droping it in from the top seems easier to me as long as it will clear everything with the gear box attached
and taking the old engine out upwards aswell
|
Dave
Member
Registered: 26th Feb 01
Location: Lancs
User status: Offline
|
Yeah, battery and tray mainly. If you were swapping like for like it would be easier from underneath but in your case you will be taking most stuff out with the engine anyway.
|
andypsgwide
Member
Registered: 13th Mar 03
Location: newcastle
User status: Offline
|
take the engine out from the top and leave the gearbox in.put a jack under the gearbox so it doesnt drop and this will make it easier to get the engine out.be careful of the brake master cylinder and take the radiator out just so you dont bash it with the engine
|
Adam-D
Member
Registered: 11th May 02
Location: Cheshire
User status: Offline
|
bonnet bumper radiator header tank battery tray is all coming out
|
Mattb
Member
Registered: 2nd Feb 03
Location: Under your sisters bed
User status: Offline
|
a 1.6 wont come out from the top with the gearbox attached, i found it very very difficult to get my engine out through the top on its own, so its drop, and take the engine out that way im afraid
|
Adam-D
Member
Registered: 11th May 02
Location: Cheshire
User status: Offline
|
ok cheers for the info
|
Greasemonkey
Member
Registered: 17th Apr 02
Location: Drives a Tractor
User status: Offline
|
i took out my GSI engine 3 months ago, vomes out the bottom, all vauxhall corsa engines should do, ya need 600mm clear clearance under the car to slide it out easily, i only had about 500mm but tiped engine on its side
|
Siberia
Member
Registered: 9th Oct 03
Location: Leprechaun Land Drives : Zafira GSI
User status: Offline
|
engine gear box as one unit!!
put car up on stands at the front disconnect everything then support engines wieght with yer hoist
un do engine mounting bolts lower engine AND gearbox together
slide out form under car
|
Greasemonkey
Member
Registered: 17th Apr 02
Location: Drives a Tractor
User status: Offline
|
i took engine out and put it back on my own its wasnt easy to position it back under the car get a mate to help trust me man
|
Andy_S
Member
Registered: 24th Mar 02
Location: Manchester
User status: Offline
|
^^^ exactly how I did it
|
Adam-D
Member
Registered: 11th May 02
Location: Cheshire
User status: Offline
|
cheers ppl much apreciated for the info
just wondering how high my jack will lift
|
Siberia
Member
Registered: 9th Oct 03
Location: Leprechaun Land Drives : Zafira GSI
User status: Offline
|
quote: Originally posted by Adam-D
cheers ppl much apreciated for the info
just wondering how high my jack will lift
put a block underneath it to get ya another bit of hieght
|
Siberia
Member
Registered: 9th Oct 03
Location: Leprechaun Land Drives : Zafira GSI
User status: Offline
|
quote: Originally posted by Greasemonkey
i took engine out and put it back on my own its wasnt easy to position it back under the car get a mate to help trust me man
should have lowered it onto an engine trolly if ya dont have one use yer muscles ya big fairy
|
corsa_jim
Member
Registered: 21st Sep 03
Location: guisborough
User status: Offline
|
hiya ppl
ive done a couple @ work n all the engines ive done hav com out the top part from a mondeo. but it will come out the bottom
jus my bit Jim
|
Robertio_uk
Member
Registered: 2nd Sep 02
Location: Nottingham
User status: Offline
|
engine under ca best was for me.. used a engine crane to left car and dragged the engine out and put car back on the axle stands
|