user401
Member
Registered: 15th Mar 04
User status: Offline
|
Hi all,
I'm hoping someone can shed some advice. I need to remove the window winder of a 1994 Holden Barina (equivalent of an Opel Corsa) as the window has jumped out of the guides.
I've had a read of the instructions in the "Tutorials and FAQ" section, however having a go at it, I cant find the clip being referred to. The window winder has been removed before as that side of the car had a dingle, and the window popped out of its guides once before.
Would anyone able to give some info on removing the window winder?
Thanks.
|
bubble
Member
Registered: 24th Jan 04
Location: Darwin, NT Australia.
User status: Offline
|
you need a circlip removing tool-it pushes a clip off that keeps winder in place
|
Greasemonkey
Member
Registered: 17th Apr 02
Location: Drives a Tractor
User status: Offline
|
you can get a tool to do this, only other way i have seen is to get a bit of cloth slide it behine the winder and hold both ends and wiggle the cloth up and down if ya get what i mean it forces the clip out
|
ed
Member
Registered: 10th Sep 03
User status: Offline
|
Dont buy a tool to do it! Use a bit of bent coat hanger like everyone else does!
|
aussiac
Member
Registered: 16th Feb 04
Location: SWEDISH
User status: Offline
|
use a fish hook i did it today works fine!
|
LukeGSi
Member
Registered: 9th Dec 03
User status: Offline
|
http://www.corsasport.co.uk/board/viewthread.php?tid=42676
|
mjw_2k2
Member
Registered: 18th Sep 03
Location: Anglesey, North Wales
User status: Offline
|
i used a large bent paper clip,
|
Adam-D
Member
Registered: 11th May 02
Location: Cheshire
User status: Offline
|
i used a thin long fladblade screwdriver
|
