M4tt
Member
Registered: 18th Apr 03
Location: Potters Bar
User status: Offline
|
im trying to change my rear damper over but i can't get the originals off
the bolt at the top ( in the boot) keeps spinning the whole damper round.
i've tried to hold the centre bit from spinning whilst turning the nut but can't do it.
is there n e trick to doing this.....
otherwise im just gonna dump my springs on without dampers for now (-60 mm)
|
Siberia
Member
Registered: 9th Oct 03
Location: Leprechaun Land Drives : Zafira GSI
User status: Offline
|
use an open ended spanner to hold it while u turn the nut
|
AdamF
Premium Member
Registered: 24th Apr 02
Location: Bexhill, East Sussex
User status: Offline
|
its hard but can be done failing that take it to a garage and ask them to undo them with an air gun themn nip them up drive home and take them off
|
M4tt
Member
Registered: 18th Apr 03
Location: Potters Bar
User status: Offline
|
yeah it gonna have to be the airgun for these bastards on my car.
went to halfords and got the correct size tools and the fecker wouldn't budge.
|
Siberia
Member
Registered: 9th Oct 03
Location: Leprechaun Land Drives : Zafira GSI
User status: Offline
|
i'm going to go out to me car and have a look at this now c what the fuss is
back! just put yer spanner on the nut then get a visegrips and put it on the top of the damper (not the threaded part)
yer not trying hard enough
[Edited on 16-03-2004 by Siberia]
|
Makarus
Member
Registered: 25th Jun 02
Location: Nottingham/Derbyshire Boarder.
User status: Offline
|
Easy as pie, dunno what your problem is, did mine in 1 hour, both backs.
|
M4tt
Member
Registered: 18th Apr 03
Location: Potters Bar
User status: Offline
|
i've chewed the top of the damper bit bit my little 6 or 7 mm spanner ( can't rem which i was using)
i was there for a good hour twisting and turning.
i had the fronts off and back on within an hour and a bit....
|
Siberia
Member
Registered: 9th Oct 03
Location: Leprechaun Land Drives : Zafira GSI
User status: Offline
|
well i know the next to get to it so--->
always works
|
M4tt
Member
Registered: 18th Apr 03
Location: Potters Bar
User status: Offline
|
quote: Originally posted by Siberia
well i know the next to get to it so--->
always works
i thought about it.... seriously though i gave the car some stick after that.
|
boyracer2002
Member
Registered: 10th Aug 02
Location: West Yorkshire
User status: Offline
|
Beat my fuckers - one side . .well both sides were fucked inside the bit where bolt goes through (all siezed up) then person b4 had bodged them on, snapped botl so half was stuck in bolt which was welded on then the other half was just welded in Fekin rough bastards!!!!!!
All sorted now tho cut old shockers off and after nights of work got new ones on
|
M4tt
Member
Registered: 18th Apr 03
Location: Potters Bar
User status: Offline
|
nice one mate
im gutted though cause it should b an easy job, i've had my mates at it and meself for ages... haha neva mind we must b abunch of weeds
|