Karnage Corsa
Member
Registered: 4th Nov 02
Location: Norton, Stockton-on-Tees
User status: Offline
|
Me being a novice is it hard to fit a speedo cable, what will I have to do as I have no idea am I right in saying part of it goes to the speedo and the other end goes somewhere to the gearbox or is that totally wrong its for a corsa gsi 2.0l 16v, I have the gsi speedo cable ordered and will be here on Saturday morning thanmks for any info Regards Paul...
|
corsafreak
Member
Registered: 1st Dec 03
Location: --- NorthEast ---2.0 16v powered
User status: Offline
|
it's quite simple geezer. attach to the back of the speedo first, take the smoothest sweeping route posible. attch the gearbox one last again taking the smoothest route with sweeping curves. tight bends will result in a snapped cable (like i had).
also take your time threading the gearbox connector as you don't want crossthread the nylon.
|
Karnage Corsa
Member
Registered: 4th Nov 02
Location: Norton, Stockton-on-Tees
User status: Offline
|
will I need it on ramps then mate or not I understand but not 100% to get it hrough to the speedo does it have to come out of the bulk head
|
corsafreak
Member
Registered: 1st Dec 03
Location: --- NorthEast ---2.0 16v powered
User status: Offline
|
no ramps. the cable passes through the bulkhead so yes it comes out that way. also the clock need to be out of the dash to clip it on.
|
Karnage Corsa
Member
Registered: 4th Nov 02
Location: Norton, Stockton-on-Tees
User status: Offline
|
thought so mate I have quite a good idea how to do it thanks mate might have to give u a shout I have ur number I am doing it Saturday want all the daft little problems out the way so I can ebay it and put it in the trader
|
corsafreak
Member
Registered: 1st Dec 03
Location: --- NorthEast ---2.0 16v powered
User status: Offline
|
give me a ring if you need to but i think you will manage ok.
|
Corsalad87
Member
Registered: 17th Jan 04
Location: Trimdon Vill near Durham
User status: Offline
|
piss easy!!!! ull have no probs!!!!
|
M2RTY
Member
Registered: 25th May 01
User status: Offline
|
mate if ure taking clocks out then swap dials over while u can get to them
|
Karnage Corsa
Member
Registered: 4th Nov 02
Location: Norton, Stockton-on-Tees
User status: Offline
|
Yes I wanna mate I need to meet up with you dont suppose yiou have been to the scrappy have u mate
|
Siberia
Member
Registered: 9th Oct 03
Location: Leprechaun Land Drives : Zafira GSI
User status: Offline
|
make sure u tighten it right down on the gearbox end.... i went through 2 of them before i figured out what a plank i was..
|
