lee mitchell
Member
Registered: 26th Jan 01
Location: kent...drive's: eveyones conversion cars hard lol
User status: Offline
|
sometimes the airflows cause the pump to carry on running. i wouldsay loom or ecu mate but unusual for it to go just like that
|
corsaandy
Member
Registered: 29th Jan 03
Location: Northamptonshire
User status: Offline
|
ok well ill have a play with it 2mrw and see what i can find out
|
Adam-D
Member
Registered: 11th May 02
Location: Cheshire
User status: Offline
|
check the connections on the ecu..
it may be possible its overfueling and flooding
does it ry and catch? or is it just turning over
|
corsaandy
Member
Registered: 29th Jan 03
Location: Northamptonshire
User status: Offline
|
just turning over i was wondering where the ground for the ecu is as i have a feeling this is what is faulty as the fuel pump stays on. but i just dont know where it grounds
|
bubble
Member
Registered: 24th Jan 04
Location: Darwin, NT Australia.
User status: Offline
|
quote:
Originally posted by corsaandy
just turning over i was wondering where the ground for the ecu is as i have a feeling this is what is faulty as the fuel pump stays on. but i just dont know where it grounds
my mates were windin over n smokin-he had not fitted loom right through bulkhead-water trickled in and got into ecu
|
corsaandy
Member
Registered: 29th Jan 03
Location: Northamptonshire
User status: Offline
|
right well car is still not starting, there is not an ecu light coming up on the dask when i turn the key to position 2 like there used to be. And also the fuel pump just wont go off as previously stated, ive tested the ecu and it is getting a live feed and a switched live also has a good ground connection and the light does actually work it just isnt getting the signal to turn on. the coil also gets power. hall sensor gives out a nice square wave. anyone got any ideas what is causing the light not to come on and let my car start? would it mayb be a sensor ont he engine or is it to do with something not being grounded properly?
andy
|
corsaandy
Member
Registered: 29th Jan 03
Location: Northamptonshire
User status: Offline
|
well i finally got it started was the ecu in the end got a spare one off of a mate and it started first time have no idea how i blew the old ecu tho :S thanks for all the help lads.
|
lee mitchell
Member
Registered: 26th Jan 01
Location: kent...drive's: eveyones conversion cars hard lol
User status: Offline
|
no worries 
|
Adam-D
Member
Registered: 11th May 02
Location: Cheshire
User status: Offline
|
make sure no water can get in an fuck up the ecu
|
corsaandy
Member
Registered: 29th Jan 03
Location: Northamptonshire
User status: Offline
|
will do 
|
