kieranscorsa
Member
Registered: 13th Jan 05
Location: Bournemouth
User status: Offline
|
Hi,
Was wondering if any one can help...
On my sony amp it has the usual, 12v and ground terminals but also it has an "REM" terminal. Could any one tell me the function of this? I had the amp connected to my old head unit and I had a wire going from a terminal on the old head unit to the rem terminal on the amp, however my new head unit does not have this terminal... so I need to know what the function of the "rem" is.
Any help would be greatly apreciated.
Kieran
|
Ally
Member
Registered: 2nd Jul 03
Location: Pontypool Drives: a Skoda
User status: Offline
|
This wire turns on the amp when your headunit comes on.
Your headunit will have one but it will be called either P+ or REM or POWER AERIAL.
If its none of those then it will be the blue wire or the blue with white tracer wire in the loom for your new headunit.
|
kieranscorsa
Member
Registered: 13th Jan 05
Location: Bournemouth
User status: Offline
|
Thanks for your help.
My "new" head unit isn't overly new, cant see any such terminal, the wiring is jusa standard iso connector.. Is it just a 12 v feed or is it a signal, if its a case of a 12v feed thats easy enough to bodge..
[Edited on 24-12-2005 by kieranscorsa]
[Edited on 24-12-2005 by kieranscorsa]
|
Rob_Corsa
Member
Registered: 4th Apr 02
Location: Derbyshire
User status: Offline
|
its just a 12v feed 
|
kieranscorsa
Member
Registered: 13th Jan 05
Location: Bournemouth
User status: Offline
|
Great, thanks for your help!
|
Richie
Member
Registered: 3rd Dec 02
Location: Newport, Wales
User status: Offline
|
Remember that this must be a switched / ignition live otherwise the amp will be on all the time.....
|
kieranscorsa
Member
Registered: 13th Jan 05
Location: Bournemouth
User status: Offline
|
yep that was the plan 
|
Ally
Member
Registered: 2nd Jul 03
Location: Pontypool Drives: a Skoda
User status: Offline
|
There will defo be one on the headunit loom though, blue wire
|
