Jon_C
Premium Member
Registered: 7th Dec 05
Location: Suffolk
User status: Offline
|
just finished doing the head gasket on my 1400 sri and need to know how tight to torque my head bolts. dont have a manual so any help would be appreciated
|
Jon_C
Premium Member
Registered: 7th Dec 05
Location: Suffolk
User status: Offline
|
anyone?
|
Dave A
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 10th Dec 03
Location: County Durham
User status: Offline
|
is it 16v?
|
Dave A
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 10th Dec 03
Location: County Durham
User status: Offline
|
8 valve:
25 nm
angle tighten 60 deg
angle tighten 60 deg
angle tighten 60 deg
|
Dave A
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 10th Dec 03
Location: County Durham
User status: Offline
|
16 valve:
25 nm
angle tighten 90 deg
angle tighten 90 deg
angle tighten 90 deg
angle tighten 45 deg
|
Jon_C
Premium Member
Registered: 7th Dec 05
Location: Suffolk
User status: Offline
|
dont get the tighten angle bit but i get the nm bit. cheers fella
|
Dave A
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 10th Dec 03
Location: County Durham
User status: Offline
|
whats there not to get? use an angle gauge (or guess) and tighten each bolt in the correct sequence by that angle. do you know what sequence to do them in?
|
Adam-D
Member
Registered: 11th May 02
Location: Cheshire
User status: Offline
|
haynes...........
|