daz 16v
Member
Registered: 12th Jun 06
Location: Pemberton, Wigan
User status: Offline
|
What the biggest lift cams i can get for a x14xe with standard pistons?
|
Vaux Lad
Member
Registered: 15th Dec 04
Location: Stoke-on-Trent
User status: Offline
|
264deg duration.
|
Warren G
Member
Registered: 14th May 06
Location: Kent
User status: Offline
|
standard cams are good for 7000rpm anyway
|
Dave A
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 10th Dec 03
Location: County Durham
User status: Offline
|
quote: Originally posted by Vaux Lad
264deg duration.
not down to the degree of the cam, its a mixture of degree and lift. some 270 degree cams will go in dependant on the lift.
|
daz 16v
Member
Registered: 12th Jun 06
Location: Pemberton, Wigan
User status: Offline
|
which cams would you get dave?
|
Dave A
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 10th Dec 03
Location: County Durham
User status: Offline
|
depends on other mods really
|
daz 16v
Member
Registered: 12th Jun 06
Location: Pemberton, Wigan
User status: Offline
|
dbilas inlet and four branch
|
Warren G
Member
Registered: 14th May 06
Location: Kent
User status: Offline
|
get a raised rev limit first
id go for 260/264 not 256 - not much greater than standard
|
Dave A
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 10th Dec 03
Location: County Durham
User status: Offline
|
schrick 264 cams produce probably the best gains on standard pistons, seem better than the piper and kent equivalent. pretty sure the newman 264 is an identical profile as well, but a lot cheaper then schrick.
|