michaelclegg
Member
Registered: 6th Jan 08
User status: Offline
|
what the best way of putting a spoiler on glue or screw?
|
gsirick
Member
Registered: 18th Feb 07
Location: mid-wales
User status: Offline
|
what spoiler are you on about mate gsi?
|
jurgen87
Member
Registered: 4th Aug 07
User status: Offline
|
i used some irmcsher black stuff its a kind of black sealer
|
michaelclegg
Member
Registered: 6th Jan 08
User status: Offline
|
gsi spoiler was thinking of 4 self tapping screws.But not sure if to glue the bottom or get some strong double sided tape.Also can i get at the rear washer by the taking the clips off?
|
Dan J
Member
Registered: 9th Jan 08
Location: Macclesfield, Cheshire
User status: Offline
|
Don't really want to stick it on. There should the 4 threaded holes in the under side of the spoiler, all you need is threaded rod about an inch long in each hole, they will slot into the holes u've drilled in your tailgate then u just need to put nuts on from the inside of the tailgate. It's not that difficult if you spend the time measuring and marking before you drill. I can explain in more detail for you if you want to do it properly. I did mine myself anyway.....
|
michaelclegg
Member
Registered: 6th Jan 08
User status: Offline
|
Just a problem with washer pipe i have took the original one out can it be pulled to have a bit to play with?as its only short
|
Dan J
Member
Registered: 9th Jan 08
Location: Macclesfield, Cheshire
User status: Offline
|
The rear washer jet doesn't have to be moved. Have u got a jet in your spoiler?
|
michaelclegg
Member
Registered: 6th Jan 08
User status: Offline
|
yes ive got a jet just need to join it but its not very long can i tug it
|