jams
Member
Registered: 17th Dec 07
Location: chester
User status: Offline
|
hello all im about to do the head gasget on my 1.6 16v sport
its a 1998
just wonderd if anyone has any tips or pointers to give me before i start
also i need the engine code to get the parts
and im getting confused between a c16xe or x16xe???
thanks lads
|
Dan295
Member
Registered: 9th Oct 06
Location: London
User status: Offline
|
do you have the tightening torques?
|
Richie B
Member
Registered: 18th Apr 04
Location: Newcastle
User status: Offline
|
Yours will be x16xe if that's something you're asking.
|
Torsa g
Member
Registered: 20th Sep 07
Location: Tamworth. Rides: An OSTRIDGE
User status: Offline
|
have you done a headgasket on a car before
|
jams
Member
Registered: 17th Dec 07
Location: chester
User status: Offline
|
yes ive done a few
not many 16v ones but im sure my dads done more than me
i have a hanes manual for the torques
thanks richie b
|
Torsa g
Member
Registered: 20th Sep 07
Location: Tamworth. Rides: An OSTRIDGE
User status: Offline
|
these are a hard engine to do, ive done these and the first one i did was a mision,
but all i will say is take ur time and if something that is in your way remove it dont make it a struggle for your self, also use a cam locking tool for the sake of a fiver its well worth getting one as these are a hard engine to time up if u havnt done one before and plus there not that safe
|
jams
Member
Registered: 17th Dec 07
Location: chester
User status: Offline
|
ok mate thanks for that
|
adibop
Member
Registered: 15th Jan 08
User status: Offline
|
Ive jest finished mine a few days ago top tip photo every thing its hard work and get your self some plasters you ''will'' cut your sef to bits.... lol i pity you
|
jams
Member
Registered: 17th Dec 07
Location: chester
User status: Offline
|
ha ha thanks mate i have been told there a bitch to do.
|
Limecat
Banned
Registered: 25th Jun 05
Location: The Internet
User status: Offline
|
X16XE isn't too bad, C16XE is a bastard as just getting the upper inlet off is a ball ache.
Sod the cam locking tool, just pull the plugs and use something to make sure all the pistons are half way up the bores, physically impossible to bend the valves then.
Whilst it is off it is worth doing the belt and tensioner.
Also, get a full headset as you can then do inlet/exhasut gaskets, cam seals, stem seals.
|
Warren G
Member
Registered: 14th May 06
Location: Kent
User status: Offline
|
http://www.corsasport.co.uk/board/viewthread.php?tid=364769
|
Torsa g
Member
Registered: 20th Sep 07
Location: Tamworth. Rides: An OSTRIDGE
User status: Offline
|
quote: Originally posted by LETGSI16V
X16XE isn't too bad, C16XE is a bastard as just getting the upper inlet off is a ball ache.
Sod the cam locking tool, just pull the plugs and use something to make sure all the pistons are half way up the bores, physically impossible to bend the valves then.
Whilst it is off it is worth doing the belt and tensioner.
Also, get a full headset as you can then do inlet/exhasut gaskets, cam seals, stem seals.
mate its not an arguement were just tryin to help someone out
|
Limecat
Banned
Registered: 25th Jun 05
Location: The Internet
User status: Offline
|
quote: Originally posted by Torsa g
quote: Originally posted by LETGSI16V
X16XE isn't too bad, C16XE is a bastard as just getting the upper inlet off is a ball ache.
Sod the cam locking tool, just pull the plugs and use something to make sure all the pistons are half way up the bores, physically impossible to bend the valves then.
Whilst it is off it is worth doing the belt and tensioner.
Also, get a full headset as you can then do inlet/exhasut gaskets, cam seals, stem seals.
mate its not an arguement were just tryin to help someone out
WTF? Where did I say it was?
|