stuartswan
Member
Registered: 25th Mar 07
User status: Offline
|
we have fitted a c20xe to a corsa and trying to get it to start, its only turning over now, does anyone know what sensors need plugged in for it to start? we dont have any airbox, exhaust mainfold or cooling system. are any of these needed to try and start the engine? thanks
|
Richardhhha
Member
Registered: 29th Sep 07
Location: Croydon, Greater London
User status: Offline
|
if you dont ahve a Air flow meter pluged in it will be a git to start..
if you dont have the Crank position sensor also known as the flywheel position sensor.. i will not start..
if the cam position sensor isnt pluged in it wont start.. (this is on other cars i have worked on)
|
stuartswan
Member
Registered: 25th Mar 07
User status: Offline
|
we cant get this to start, its cranking put no fuel and no spark, the only thing i can think of is the red wire on the 9 pin plug at the drivers footwell. where is this meant to connect to?
|
sand-eel
Member
Registered: 15th Mar 07
Location: carluke/braidwood--IRNBRULAND
User status: Offline
|
if the CTS was not registering because of no coolant......might be it maybe?
|
Richardhhha
Member
Registered: 29th Sep 07
Location: Croydon, Greater London
User status: Offline
|
ok no fuel and no spark.... Your fuel pump isn't working for one.... Is the fuel pump relay pluged in... Also no spark... Make sure the roter arm in the distributor is there.. Or the coil pack is plugged in, and the crank position sensor is plugged in! Also the ht coil (if dizzy type) is plugged in properly...
|
stuartswan
Member
Registered: 25th Mar 07
User status: Offline
|
yes the fuel pump realy is plugged in
il check the other stuff tomorrow, thanks for the help
|
Richardhhha
Member
Registered: 29th Sep 07
Location: Croydon, Greater London
User status: Offline
|
is it primeing? If not then check your wiring. All your problems could be something daft like a earth problem... Lol, if your still getting no luck, drop lee mitchell a message... Always been refered to him when asking about fitting a xe or a let....
|
