Charlie12345
Member
Registered: 14th Apr 08
Location: Cambridgeshire
User status: Offline
|
is it easy to take the centre box out yourself and the cat?
What do i need if was going to get someone else to do it for me?
What sizes of pipe of whatever will i need and a pirce?
|
Dave A
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 10th Dec 03
Location: County Durham
User status: Offline
|
taking the centre section and cat section off is easy.
you will need cash to pay someone if they do it for you.
what will you need pipe for?
|
Charlie12345
Member
Registered: 14th Apr 08
Location: Cambridgeshire
User status: Offline
|
so i can do i tmy self jack it up and take it off i assume the ipe to feel in the gap where the centre section was will i need to weld or anything or is it jsut nuts and bolts?
|
Dave A
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 10th Dec 03
Location: County Durham
User status: Offline
|
sorry, I dont understand what you are trying to do.
|
Charlie12345
Member
Registered: 14th Apr 08
Location: Cambridgeshire
User status: Offline
|
sorry im not very good i assumed you take centre box out and put the pipe in its place?
|
Dave A
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 10th Dec 03
Location: County Durham
User status: Offline
|
will be noisy and raspy probably.
|
Charlie12345
Member
Registered: 14th Apr 08
Location: Cambridgeshire
User status: Offline
|
what in a good way wether i did it or someone else? do you get what i mean with the pipe now?
|
Dave A
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 10th Dec 03
Location: County Durham
User status: Offline
|
yes, you want to cut out the cat and/or silencer boxes and weld /bolt in a pipe to make the car raspy and noisy?
|
Charlie12345
Member
Registered: 14th Apr 08
Location: Cambridgeshire
User status: Offline
|
not noisy nice and raspy lol yeah so i need a pipe will i need to weld what would i need can you help me with a list please 
|
Dave A
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 10th Dec 03
Location: County Durham
User status: Offline
|
get the car on some ramps, use an air powered hacksaw or angle grinder to cut out the box, measure tha gap, select the correct bore of pipe and cut to size, flare ends so suit and sleeve over existing pipe and tack weld into position, remove section from car and weld up fully.
then start the car, regret what you have just done and buy a new centre section for 15 quid.
|
M666TT C
Member
Registered: 17th Jun 08
Location: Orpington, Kent
User status: Offline
|
lol...... oh dear... i bet he wished he never asked....
|
