Foz
Member
Registered: 8th May 02
Location: Bristol
User status: Offline
|
How much are these to get fitted on a GSi?
|
BeArDy
Member
Registered: 7th Aug 00
Location: Manchester
User status: Offline
|
find out which sensor and replace it yourself 
|
Foz
Member
Registered: 8th May 02
Location: Bristol
User status: Offline
|
ABS Sensor!
I'd rather not cause it will go wrong!
|
Dave Helium
Member
Registered: 28th Mar 02
Location: Aberdeen Drives: Mk4 ibiza fr and omega elite 3.2v
User status: Offline
|
if its the same one as on my 1.4 16v sport they r not cheap! i think i was about £60 for 1!!!! 
|
smoggie
Member
Registered: 16th Mar 04
User status: Offline
|
Abs sensors arent hard to change at all. As long as u know which one!
|
simonp
Member
Registered: 12th Jan 01
Location: Portishead Drives:Nissan 300ZX Twin Turbo
User status: Offline
|
Jesus, ABS sensors are plug and play. It's like changing a light bulb.
Jack the car up, take the wheel off. If you look directly opposite to the caliper, you'll see the sensor bolted to a bracket. Undo that remove from bracket, unclip from connector and refit.
10 minute job.
Why are you fitting one anyway? You suspecting a fault?? Make sure it is the ABS sensor that's at fault an not the wiring or ABS Control module.
You can actually read the codes from the ABS ECU in much the same way you read the codes from the engine ECU.
There's a link here somewhere http://www.topbuzz.co.uk
|
vxlgsi
Member
Registered: 28th Aug 03
User status: Offline
|
how do you read the faults, can find anything on topbuzz
|
luke85
Member
Registered: 26th Nov 07
Location: Chesterfield
User status: Offline
|
Can send you a working set of all for for £30 if you like, came off a running GSi today with fully working ABS. One has been swapped at some point because its slightly different but they all work perfectly.
|
