pkerridge493
Member
Registered: 15th Jan 09
Location: peterborough
User status: Offline
|
after doin a 2.0 16v nova i am now looking at doin a corsa v6 any one know what ill need for the transplant! ie driveshafts and mounts and probaly using the v6 gearbox too if thatll fit! ps havent got the car or engine yet but seems like a good one to do!!!!!!!!!!!!!
[Edited on 16-01-2009 by pkerridge493]
|
flame
Member
Registered: 31st Mar 02
Location: N. Ireland
User status: Offline
|
Engine mounts and driveshafts etc can be got from Chris astley motorsport, Rear exhaust manifold needs modified to fit and some of the bulkhead needs cut to fit the rear part of the cam cover and inlet manifold if you use the cavalier inlets. If you use the X25XE from a vectra then you need the engine mounting bracket from a cavalier v6 as well.
|
pkerridge493
Member
Registered: 15th Jan 09
Location: peterborough
User status: Offline
|
ok cool didnt think be too difficult as took an angle grinder to most parts on the c20xe !
|
andyc1234
Member
Registered: 7th Nov 06
Location: Lancashire
User status: Offline
|
use everything off the c20xe flywheel box shafts and mounts only mount you need to buy is the one on the engine
|