Corsa_Quadz
Member
Registered: 24th Feb 08
Location:
User status: Offline
|
I have on my c20xe cream injectors. I have a 3.0 bar FPR. Through various sources its known that Cream injectors should be run on a 2.5 bar FPR and Blues on a 3.0 bar FPR.
I have a dizzy on my engine which should be running the creams at 2.5
I currently have a 3.0 bar FPR running them (was on there when purchased)
Do i (A) Change the injectors to the blue ones
or (B) Change the FPR to a 2.5 bar?
Im dead confused as 3.0 bar should be on later models with coilpack on blue injectors and i have a dizzy on mine with a 3.0 bar FPR running creams.
Basically i have a set of blue injectors is it going to overfuel and make the car run shit or will it be ok? baring in mind i have a 3.0 bar FPR on there atm.
Confusing it might be but which should i change for the better??
thanks guys much appreciated
|
Corsa_Quadz
Member
Registered: 24th Feb 08
Location:
User status: Offline
|
anyone out there
|
alan-g-w
Member
Registered: 9th Nov 07
Location: Glasgow
User status: Offline
|
Mate, you've made about 4 threads about this same thing.
Change the FPR, it's not in a difficult position to do.
|
Olsrey
Member
Registered: 13th Jan 07
Location: Bradford Drives: LET Vectra B
User status: Offline
|
quote: Originally posted by alan-g-w
Mate, you've made about 4 threads about this same thing.
Change the FPR, it's not in a difficult position to do.
|
Warren G
Member
Registered: 14th May 06
Location: Kent
User status: Offline
|
i have some blue injectors is needed
|
mac1976
Member
Registered: 29th Dec 06
Location: tullibody , clackmannanshire
User status: Offline
|
dont put blue injectors in it will over fuel and wash your boars out . put the 2.5 reg on
|
Corsa_Quadz
Member
Registered: 24th Feb 08
Location:
User status: Offline
|
quote: Originally posted by alan-g-w
Mate, you've made about 4 threads about this same thing.
Change the FPR, it's not in a difficult position to do.
Didnt realise there was a limit on how many threads you were allowed to make
Will change the FPR over when i get hold of one, considering i had the blue injectors anyway thought that would be an option.
Thankyou Mac1976 for the advice
|
fazza
Member
Registered: 7th Feb 08
Location: Plymouth
User status: Offline
|
|