dalejones
Member
Registered: 9th Dec 08
Location: Swansea, Wales
User status: Offline
|
need bit of help, wot do you need altogether to run throttle bodies, i got r1 carbs, i got omex programmagle ecu an i got the inlet manifold but i dno wot else i need? x16xe cheers
|
Ste
Premium Member
Registered: 5th Mar 03
Location: Taif, Saudi Arabia
User status: Offline
|
You'll need the throttle bodies for a start. It sounds like you have the rest of the kit though.
http://corsasport.co.uk/board/viewthread.php?tid=96237
I would rather lose by a mile because i built my own car, than win by an inch because someone else built it for me.
|
dalejones
Member
Registered: 9th Dec 08
Location: Swansea, Wales
User status: Offline
|
i thort that the r1 carbs were the throttle bodies :S
|
Ste
Premium Member
Registered: 5th Mar 03
Location: Taif, Saudi Arabia
User status: Offline
|
No, they are carbs. tbh, carbs are just as good if not better as they are loads cheaper than fuel injected throttle bodies. Only issue with bike carbs is the fact that they are so close together they don't have a very straight inlet tract when you mount them to a big engine block.
Still, they are a good base for future expansion and you can get some twin 40 webers in there next
I would rather lose by a mile because i built my own car, than win by an inch because someone else built it for me.
|
DAZ1985
Member
Registered: 3rd Sep 06
Location: Scholar Green, Cheshire
User status: Offline
|
some r1's have tb's iirc
later ones
|
DaveyLC
Member
Registered: 8th Oct 08
Location: Berkshire
User status: Offline
|
Yep, post 2002 R1 has TB's.
|
dalejones
Member
Registered: 9th Dec 08
Location: Swansea, Wales
User status: Offline
|
so now i got the bike carbs all set up ready wot do i need? to run them?
|