MikeH
Member
Registered: 3rd Apr 03
User status: Offline
|
Can someone help me out with some info about the central locking system in the corsa B?
I am planning to fit a kit to convert my central locking to remote lockign but need to know if the car is "NEG, POS, PNEUMATIC, MOTOR INTERUPT, LOCK DRIVE or SINGLE WIRE LOCKING"
Or maybe i can sinply make the kit control the drivers locking motor with an external current and that will in tuen trigger the rest.....
The instructions for the kit are here http://www.nepata.de/nepatronics_com/support/ISG310-UK.pdf
I would be really grateful for ANY help anyone can offer..
Thanks
Mike...
|
MikeH
Member
Registered: 3rd Apr 03
User status: Offline
|
from the wiring diagram it looks like its Negative impulses but i would like to make sure!
Anyone whos fitted a car alarm should know.
|
Luke1.4
Member
Registered: 2nd Dec 02
Location: Blackpool
User status: Offline
|
Yeah its negative mate
[Edited on 15-05-2003 by Luke1.4]
|
MikeH
Member
Registered: 3rd Apr 03
User status: Offline
|
Fantastic, so i suppose i'll just be wiring the kit into the central locking unit by the drivers feet........
|
MikeH
Member
Registered: 3rd Apr 03
User status: Offline
|
don't suppose you know the colour of the 'locking' and 'unlocking' wires then? 
|
MikeH
Member
Registered: 3rd Apr 03
User status: Offline
|
would it be the brown/red and red/yellow wires from the main lockign unit? but which is which?
|
Cavey
Member
Registered: 11th Nov 02
Location: Derby
User status: Offline
|
Controller Box
Mount in the fusebox with a screw or velcrow the velcrow is stuck on the back of
the controller box, The Black and White wire coming out of the controller box is
for a Pager this is not used unless you want to connect a pager, The black wire
is the attenna and try to keep it away from metal as this will affect the range
of the units.
The wires coming of the connector
Red to a 12V supply or the battery (You will need some more cable if you want to
connect it to your battery)
Black a good earth on the body or the the negative on the battery you will need
more cable if you connect it you your battery.
Orange this gose to the hazard warning unit or to the indicators so they flash
when you lock and unlock the car.
Red\Black lock or unlock or common
Purple lock or unlock or common
Black\White lock or unlock or common
These three wires are trial and error in you car but they must be connected to
the central locking controller or to the maser motor which is in the drivers
door.
that's the info i got from a guy i'm getting my Remote Locking kit from... dunno if it'll help ya
|
digitalbanana
Member
Registered: 24th Nov 02
User status: Offline
|
any1 installed one without existing CL and no CL wires in loom? is it hard?
@ Cavey, where u getting ur kit from?
|
Cavey
Member
Registered: 11th Nov 02
Location: Derby
User status: Offline
|
Was some bloke on ebay
|
MikeH
Member
Registered: 3rd Apr 03
User status: Offline
|
Cavey: thanks for the info, you've given me some more ideas.. but i think my colours may be different to yours.
I think from the wiring diagram i can figure out the 3 lock/unlock wires......
|
MikeH
Member
Registered: 3rd Apr 03
User status: Offline
|
cavey: is your kit the Gamma G310 off ebay?
|
MikeH
Member
Registered: 3rd Apr 03
User status: Offline
|
Cavey:
It's just you say: black/white isn't needed, but then say its lock/unlock/common as well.
And you say purple is lock/unlock/common and my instructions say thats actually positive voltage from the ignition...
|
MikeH
Member
Registered: 3rd Apr 03
User status: Offline
|
Ahh well i guess i'll find out by trial and error on monday when i try and fit it.
Maybe i'll take progressive photos of it and submit a tutorial.
|
MikeH
Member
Registered: 3rd Apr 03
User status: Offline
|
Please!!! anyone out there who can help!!!!
I've correctly wired the pos, neg, and switched pos.
I've now come to the conclusion that the car needs positive impulses to trigger and not negative ones and so have wired part of the system to the positive side.
I need to know which wires to send the signal on to lock and unlock the doors. Some of the colour coding on the wires doesn't seem to agree with haynes!!!
Also where is the best place to connect up my indicators?
Mike....
|
MattyB
Member
Registered: 13th Nov 01
Location: 118.5bhp :D
User status: Offline
|
I used a 3rd party professional CR system, and ran new wires thru the car. much easier. did it in 1/2 a day but looks pro.
Matt
|
