Aleex
Member
Registered: 21st Jul 09
Location: Plymouth
User status: Offline
|
Need help doing the paperclip test?
Ive tried finding tutorials but the tutorial on here doesnt work as my pin set up is different?
I drive a 1.2 16V CORSA B, 5 door. Any help would be great?
Also if i press the clock button with the other button it comes up with F12 and F95?
Can anyone shed any light on this?
|
Aleex
Member
Registered: 21st Jul 09
Location: Plymouth
User status: Offline
|
ttt, anyone
|
barneykarl
Member
Registered: 29th Jul 06
Location: Stevenage
User status: Offline
|
What is your engine code,not all 1.2,s can be done the clip way.
|
Root
Member
Registered: 28th Dec 08
User status: Offline
|
he said 1.2 16v, so it's x12xe.
there is only 10 and 16 pin and i think the paperclip tutorial covers both of them
just re-check:
http://corsasport.co.uk/board/viewthread.php?tid=101080
[Edited on 22-03-2010 by Root]
|
Aleex
Member
Registered: 21st Jul 09
Location: Plymouth
User status: Offline
|
well mines a t reg so 1999 and tutorial says it might not work + my engine management light does actaully stay on all the time just comes on when accelerating sometimes in 2nd 3rd 4th and 5th gear.
|
barneykarl
Member
Registered: 29th Jul 06
Location: Stevenage
User status: Offline
|
No x12xe on the list. think you need to get this on a tech2.
|
pow
Premium Member
Registered: 11th Sep 06
Location: Hazlemere, Buckinghamshire
User status: Offline
|
X12XE can't have the paperclip test done.
Just pay the £40 for a daignostic test.
Down on power? My betting is Air Flow Meter
|
Vivasam
Member
Registered: 31st Jan 10
User status: Offline
|
F12 is initiation of testing. F95 is low voltage at hot start valve or circuit.This could either be the air flow meter, or the Air temperature sensor fault code.
|
Aleex
Member
Registered: 21st Jul 09
Location: Plymouth
User status: Offline
|
well ive ordered an airflow meter anyway and see if that solves the problem
|
Aleex
Member
Registered: 21st Jul 09
Location: Plymouth
User status: Offline
|
replaced the airflow meter yesterday and now it runs all smoothly with no EM light appearing, cheers for the advice
|