°*°Corsagsi°*°
Member
Registered: 21st Mar 10
Location: North east
User status: Offline
|
Can anyone tell me does a x16xe head fit on a c16xe block or does it have to be a c16xe head??
|
Scotty C
Member
Registered: 6th Nov 05
Location: Kidderminster Drives: 1.6 16v Sport
User status: Offline
|
The X16 will fit
|
Richardhhha
Member
Registered: 29th Sep 07
Location: Croydon, Greater London
User status: Offline
|
yeah but the x16 head has smaller ports and are a differemt design, plus you will have the egr on the x16 head..
Whats wrong with the c16 head?
|
°*°Corsagsi°*°
Member
Registered: 21st Mar 10
Location: North east
User status: Offline
|
Av fucked the valves on it
|
Richardhhha
Member
Registered: 29th Sep 07
Location: Croydon, Greater London
User status: Offline
|
so just change the valves if it hasn't gouged the combustion chamber, and if its cracked a valve guide or two then get them replaced as most people dont when rebuilding a engine and wonder why the buggers drink oil even tho they change stem seals and rings..
If you go down the x16 route it wont feel as quick even tho it will only be 4bhp difference and you'll need to run a different maniold ect.. Up to you tho
|
°*°Corsagsi°*°
Member
Registered: 21st Mar 10
Location: North east
User status: Offline
|
Is it a twat to change the valves?
|
Richardhhha
Member
Registered: 29th Sep 07
Location: Croydon, Greater London
User status: Offline
|
not really its just time consuming and a little fiddly with the colits but thats about it.. You will need to get the stem's checked tho as they could have cracked depeding on how badly bent the valves got.
|
philip2
Member
Registered: 1st Oct 06
Location: n.wales/chester
User status: Offline
|
Head isnt a dif port design, its just slightly smaller. The egr is on the lower inlet and seeing as the c16 doesnt have an egr then it doesnt matter anyway. Valve sizes are the same on both the heads. So to answer question. A x16xe wil fit straight on. And u wont feel a dif between 2 stock heads over 3bhp. Also inlet and ex wil fit, the ONLY dif between the pair is the inlet on x16 is tad smaller thats it.
[Edited on 10-04-2010 by philip2]
|
Root
Member
Registered: 28th Dec 08
User status: Offline
|
you just need a compression tool to change the valves and some patience
|