milky2010
Member
Registered: 31st Jan 10
Location: Luton
User status: Offline
|
just put a 20l 8v in my 14 16v wired it all up and its not sparking we tryed puting wiers to the coil and to the battery and the standerd alam is on and i do not no how to turn it off or to make it spark can you help me pleaze
|
Vivasam
Member
Registered: 31st Jan 10
User status: Offline
|
Did you use your own ecu, if so this is where the problem is. You will need the same ecu as used in this engine, the keys and barrel as well would be a bonus.
Turn off the alarm inside the car, just above the mirror. Press the button, and it shoud shut down ok
|
milky2010
Member
Registered: 31st Jan 10
Location: Luton
User status: Offline
|
ive got the 20l ecu in its all wired up and did the paper clip test and it said the crank senser has no siganl changed it and sill no siganl
|
mex
Member
Registered: 25th Apr 10
Location: East Yorkshire
User status: Offline
|
If the crank sensor has no signal it means that there is no signal from the ecu to the crank therfore it is a wiring / immobilizer fault
|
