Sly_SRi
Premium Member
Registered: 9th Apr 04
Location: Reading, UK Drives: Corsa C
User status: Offline
|
So I'll keep this brief, I have a EM fault that keeps returning. Car is a Corsa C with Z20let.
The fault throws the Ecu into limp home mode and remains like that until you switch the engine off. It occurs under slow driving conditions, I.e. driving around town. If I drive fairly quick then it is less likely to happen.
I have a code reader and I've read the fault codes which are:
P1120, P1122 & P0650
Having done lots of research I then changed the pedal and the throttle body.
The fault is still there.
So what else can it possibly be?
Thanks in advance 
Corsa C Z20Let
Black Sleeper Turbo Project
|
Dan
Premium Member
Registered: 22nd Apr 02
Location: Gorleston on Sea, Norfolk
User status: Offline
|
What code reader? I have a standard obd2 one which read my vectra codes. Said it had a completely different fault to my opcom.
Just something to think about if your using a basic reader
Adult GiftsClick here to vist us
|
Sly_SRi
Premium Member
Registered: 9th Apr 04
Location: Reading, UK Drives: Corsa C
User status: Offline
|
Well in actual fact I used the pedal test to get the codes, I use the code reader just to clear the Em light and clear the codes to help the diagnose process...
Is there anything else that it could be other than the tb & pedal?
Corsa C Z20Let
Black Sleeper Turbo Project
|
monkeytwizzel
Member
Registered: 10th Aug 11
Location: Chard, Somerset
User status: Offline
|
What are the faults that the codes relate to?just bare in mind that some faults only exist because of other faults ie lambda fault can show when a crankshaft sensor fails only because of unburnt fuel so use logic
|
corsadonk
Premium Member
Registered: 4th Jul 09
Location: Marlborough, Wiltshire
User status: Offline
|
What do the codes mean?
I've heard of the actuators overboosting, making it go into safe mode.
|