snoop
Member
Registered: 21st Nov 05
Location: Dudley, West Midlands
User status: Offline
|
Hi all is there a fitting guide for the lexmaul inlet cant seem to find one. Thanks
|
corsa-torque
Member
Registered: 15th Mar 11
User status: Offline
|
If you cant fit a lexmaul Inlet you shouldn't be near a car tbh...
Remove old inlet 5 bolts (two front, 3 rear) and undo the jubilee clip to the throttle body.
Then just remove the odd vac hose.
Fitting the lexmaul is the reverse of removing the standard inlet.
It's that easy
[Edited on 04-03-2014 by corsa-torque]
|
snoop
Member
Registered: 21st Nov 05
Location: Dudley, West Midlands
User status: Offline
|
Thanks for your abusive help
|
Haimsey
Premium Member
Registered: 8th May 05
Location: Nottingham Drives: Corsa B
User status: Offline
|
As above TBF
Dunno if you can glean anything from my project thread.
Marcy Marc 
White Sport Progress Thread
|
snoop
Member
Registered: 21st Nov 05
Location: Dudley, West Midlands
User status: Offline
|
Good project you have done a fair bit. Only just gathering bits for my gsi. Lower x16xe inlet picked up so can crack on fitting lexmaul.
|
jasonk-2009
Member
Registered: 19th Dec 13
User status: Offline
|
He means he needs to fit the lower inlet of a x16xe as it needs adapting for his gsi. Remove old inlet (top) 5 bolts. remove throttle body, (remove expansion tank for easier access to throttle body). remove alternator then you should have enough room either side to get a socket on the lower inlet bolts. its awkward but you can do it. The blue connecter plug twists to undo I believe. I hear people also have removed it from underneath the car, as to which way is best I honestly don't know....just a rough guide to help you mate, others will no more.
Despite others beliefs sarcasm unfortunately wont help you get it fitted. good luck
|
corsa-torque
Member
Registered: 15th Mar 11
User status: Offline
|
If he asked the question properly he would get a proper answer, was no mention of engine or what he required fitting other than the lexmaul.
|
jasonk-2009
Member
Registered: 19th Dec 13
User status: Offline
|
i appreciate that but people ask for advice not opinions on there mechanical ability
|
snoop
Member
Registered: 21st Nov 05
Location: Dudley, West Midlands
User status: Offline
|
I have a pit in my garage so will try from both top and bottom. Cheers
|
