deanmcreynolds26
Member
Registered: 15th Sep 03
Location: E46 //M3
User status: Offline
|
Alright folks.
clutch cable went las night waiting for my new one goin to get in 15minutes..
How easy to fit? and wats the best way? hints and tips??
cheers 
|
deanmcreynolds26
Member
Registered: 15th Sep 03
Location: E46 //M3
User status: Offline
|
HELP 
|
mike_1.2LS96
Member
Registered: 23rd Oct 03
Location: Darlington | Mazda 323 1.8 Exec
User status: Offline
|
Yep quite easy. Look for the clip round the back of the gearbox, its locked in near the gear linkage, after that its just the ends of the cable, one goes through the bulkhead and latches onto the pedal lever. The other just slides out at the other end above the gearbox.
I would take the battery or coolant bottle out first, will make it easier to get access.
|
MJ
Member
Registered: 18th Sep 03
Location: Hampshire Drives: ITR DC2 + Skoda Felicia
User status: Offline
|
i need mine a couple of weeks ago, get a pole and lever the clutch arm in the engine forward so that u can unhock the cable, the just go into the car and unhock the clip on the pedal and then pull it tho the bolkhead and thats its. fittin one is the sma e but in reverse, the haynes manual tells u how to do it in there.
|
mike_1.2LS96
Member
Registered: 23rd Oct 03
Location: Darlington | Mazda 323 1.8 Exec
User status: Offline
|
You don't need to lever the clutch arm, the cable pulls out enough to adjust it.
|
aceman
Member
Registered: 11th Jun 04
Location: scotland
User status: Offline
|
absilute night mare expect the car to be off the road for a week easy rather you than me
|
