jamesvalver
Member
Registered: 21st Feb 03
Location: Bury St Edmunds, Suffolk
User status: Offline
|
finally got the speedo cable connected after changing the dash, now the speedo isnt working. the cable is ok and the dials are ok.
looks like im going back to the start with these dials tomorrow
|
J200RSA
Member
Registered: 23rd May 05
Location: Sheffield
User status: Offline
|
you could always by my speedo james 
will be somthing daft like a loose connection or something, i had a few problems when i took my dash out before
|
jamesvalver
Member
Registered: 21st Feb 03
Location: Bury St Edmunds, Suffolk
User status: Offline
|
its a cable driven 1. is there any other cable you can fit on a valver corsa that'll work with the dials and the gearbox from another vaux that'll have a longer cable?
|
deanmcreynolds26
Member
Registered: 15th Sep 03
Location: E46 //M3
User status: Offline
|
try a mk3 astra cable!
|
CorsaChris12
Member
Registered: 28th Jul 04
Location: Billingham, Stockton-on-Tees
User status: Offline
|
might sound stupid but i did this and it was a fuse that had blown when i put it in,
|
jamesvalver
Member
Registered: 21st Feb 03
Location: Bury St Edmunds, Suffolk
User status: Offline
|
the speedo is cable opperated so it doesnt need a fuse
|
CorsaChris12
Member
Registered: 28th Jul 04
Location: Billingham, Stockton-on-Tees
User status: Offline
|
Well i though this untill i was messing on with it i hear a pop and i checked the fuse it was a yellow fuse that had blown replaced it and it worked.
[Edited on 28-03-2006 by CorsaChris12]
|
jamesvalver
Member
Registered: 21st Feb 03
Location: Bury St Edmunds, Suffolk
User status: Offline
|
hmmm...,. interesting info so ill have to check that in the morning
|
abdus
Member
Registered: 23rd Feb 06
User status: Offline
|
only electrical speedos will need a fus
http://www.corsasport.co.uk/board/viewthread.php?tid=271654
The small white plastic gear wheel or spinner or whatever name might be broken or slipping...
[Edited on 28-03-2006 by abdus]
|
CorsaChris12
Member
Registered: 28th Jul 04
Location: Billingham, Stockton-on-Tees
User status: Offline
|
quote: Originally posted by jamesvalver
hmmm...,. interesting info so ill have to check that in the morning
Yea best to mate i was pulling my hair out before when it wasnt working went back to basic and it still didnt work i changed the fuse and it started working again. This was when i fitted my leds in the dash and the centre console, i noticed you took out all your dash so when you took out the centre console or your dash you probs have poped a fuse i did it about 10 times when putting my dash back in. Pound land came in handy when needing a box of fuses
Hope it is that anyway m8t.
|
Tom J
Organiser: South Wales Premium Member
Registered: 8th Sep 03
Location: Bridgend
User status: Offline
|
where did you get the cable from? i got a cable from a motor factors and it was too short so didnt turn it properly, got a gm one and it worked perfect
Tom
|
jamesvalver
Member
Registered: 21st Feb 03
Location: Bury St Edmunds, Suffolk
User status: Offline
|
i havent replaced the cable yet. thats the next thing if i cant sort it anyother way
|
Tom J
Organiser: South Wales Premium Member
Registered: 8th Sep 03
Location: Bridgend
User status: Offline
|
the outer cable seems to be bigger and the inner bit is too short on the non gm ones so it slips off
|