Alex16v
Member
Registered: 30th Jun 06
Location: Chester Drives: Civic ep3 final edition
User status: Offline
|
Right i think i know what i need i just thought i would compile a list to make sure. (I have tried searching but no topics were too clear.)
+ c20xe
+ f20
+ ECU + Loom
+ GSi shafts
+ Cav inner CV's
+ Chris Astley - Vauxhall Corsa Engine Mount Kit For 2.0 Conversion (2)
|
Basscrazy
Member
Registered: 16th Sep 05
Location: If im on here then clearly in front of the pc
User status: Offline
|
brakes
pipes
filter
sfi replacement either cap or tube
timing belt
mtec shafts instead
exhaust manifold
exhaust middle sectin 2.25
transducer so speed shows?? dependant on car spec etc
seam welded?
different rad?
just off top of my head probably could think of more
|
pdwhelan
Member
Registered: 25th Sep 06
Location: Wigan
User status: Offline
|
+BALLS
+TIME
hehe you know what i mean, its a big job etc etc  
|
Alex16v
Member
Registered: 30th Jun 06
Location: Chester Drives: Civic ep3 final edition
User status: Offline
|
+ Time << yes, going to spend ALOT of time on this when i finally do it.
What will need to be seam welded ?
I already have v6 brakes all cleaned up waiting. 
|
donvaux
Member
Registered: 6th Oct 05
Location: Pontypool, Torfaen
User status: Offline
|
gsi shafts i found are fine, and alot cheaper and seam welding only really needs doing if your gonna rally it
|
C4RL0
Member
Registered: 30th Sep 06
Location: Cumbria
User status: Offline
|
Don't really need to seem weld anything
|
Alex16v
Member
Registered: 30th Jun 06
Location: Chester Drives: Civic ep3 final edition
User status: Offline
|
Ok cool, cheers. I didn't think anything needed welding.
|
Alex16v
Member
Registered: 30th Jun 06
Location: Chester Drives: Civic ep3 final edition
User status: Offline
|
Just found this!
http://www.corsasport.co.uk/board/viewthread.php?tid=224061
|
donvaux
Member
Registered: 6th Oct 05
Location: Pontypool, Torfaen
User status: Offline
|
lol good thread that is
|
Basscrazy
Member
Registered: 16th Sep 05
Location: If im on here then clearly in front of the pc
User status: Offline
|
seam welding is the proper way to do it didnt mean it had to be just some do
|
Alex16v
Member
Registered: 30th Jun 06
Location: Chester Drives: Civic ep3 final edition
User status: Offline
|
quote:
Originally posted by Basscrazy
seam welding is the proper way to do it didnt mean it had to be just some do
thanks for the info, ill look into it.
|
Basscrazy
Member
Registered: 16th Sep 05
Location: If im on here then clearly in front of the pc
User status: Offline
|
just thinking if your wanting to do a really top wack job its worth it take to track days etc
|
rallyman
Member
Registered: 28th Dec 05
Location: Chorley, Lancashire
User status: Offline
|
Seam welding can be a bit over the top, would recommend putting the corsa strengthening kit on though!
One other thing i would look at is a set of conversion silicone hoses make things much easier, or at least the top hose which i sell seperatly cause it can be a pig to do!
Chris
|
Alex16v
Member
Registered: 30th Jun 06
Location: Chester Drives: Civic ep3 final edition
User status: Offline
|
quote:
Originally posted by rallyman
Seam welding can be a bit over the top, would recommend putting the corsa strengthening kit on though!
One other thing i would look at is a set of conversion silicone hoses make things much easier, or at least the top hose which i sell seperatly cause it can be a pig to do!
Chris
Thanks mate. Ill have a look into it now.
I think i will go for just the top hose for now, then upgrade to all silicone in the future after i know its all running. Is the top hose on your website?
EDIT: found it, it was on the next page.
[Edited on 07-01-2007 by Alex16v]
|
rallyman
Member
Registered: 28th Dec 05
Location: Chorley, Lancashire
User status: Offline
|
No problem alex, give us a shout if you need help with anything or cant find what you need....
Chris
|
Alex16v
Member
Registered: 30th Jun 06
Location: Chester Drives: Civic ep3 final edition
User status: Offline
|
quote:
Originally posted by rallyman
No problem alex, give us a shout if you need help with anything or cant find what you need....
Chris
Cheers mate, much appreciated. Ill let you know after i have sorted the rest of the stuff out. 
|
