antman
Member
Registered: 13th Aug 06
Location: Cumbria
User status: Offline
|
I have just been connecting up all my water pipes etc and i have one left over and cant find a home for it!
The pipe comes off the bottom of the inlet manifold! If somebody would be kind enough to have a quick look at where theirs go i would be very grateful!
[Edited on 06-02-2007 by antman]
|
ed
Member
Registered: 10th Sep 03
User status: Offline
|
It's not a water pipe. It's the pipe for the ICV isn't it?
|
antman
Member
Registered: 13th Aug 06
Location: Cumbria
User status: Offline
|
It might explain why i cant find anywhere to connect it too! Wheres my ICV and what does it look like?
|
ed
Member
Registered: 10th Sep 03
User status: Offline
|
Your ICV is wherever you left it when you took it off
It's a small silver cylinder which has a plug on it - the wiring comes from the wiring loom. It has another pipe which goes to the top of the engine and connects to the SFi box/Ecotec pipe/power cap in front of the throttle body.
All the water goes in and out of the manifold through the head so you don't need to worry about that one
Been looking for pictures, sadly can't find anything at the moment...
|
mac1976
Member
Registered: 29th Dec 06
Location: tullibody , clackmannanshire
User status: Offline
|
there is water pipes on the inlet manifold the one your talking about goes to the expansion bottle this is why you need a twin exit on your bottle ..
|
antman
Member
Registered: 13th Aug 06
Location: Cumbria
User status: Offline
|
On my bottle i have 2 pipes at the very top and one at the bottom,
Am I correct in thinking i need a bottle with 2 at the bottom aswell as 2 at the top?
|
and-m
Member
Registered: 5th May 02
Location: Liverpool. Drives. Skud vRS.
User status: Offline
|
Dude, post up some pics as you cant get a header tank like youre talking about.
|
antman
Member
Registered: 13th Aug 06
Location: Cumbria
User status: Offline
|
This is my bottle,
1. I have this pipe (pipe not not shown) going to behind the engine
2. I have this pipe going to underneath the centre of the inlet manifold
3. I have this pipe going to the top of my radiator
1. This is the pipe i cant find a home for, its coming off the side of the inlet maifold
1. This is the end of the pipe which comes off the side of the inlet manifold, its really long and i cant seem to find any where for it to go
Hope this helps explain what im talking about
|
Rob_Lee
Banned
Registered: 9th Dec 05
Location: Folkestone Drives: Nova 1.6 16v
User status: Offline
|
Thats the pipe for the brake servo matey
|
antman
Member
Registered: 13th Aug 06
Location: Cumbria
User status: Offline
|
Just been down to my garage and your right! It is the pipe for the brake servo! Top man!
|